Picked up one of these last night

Nick · Post by **Nick** » Fri May 28, 2004 1:53 pm

I picked up a tenon cutter last night at the hardware store. The tenons I've been using are 9/32nds from Mark Tinsky. This cutter was 5/16, and I figure sanding off 1/32nd wouldn't be a big deal at all. I'm hoping it'll work well, but we'll see. I kept the receipt. Looks like it will take a very steady hand.

Ohh, here's the link:
http://shop.woodcraft.com/Woodcraft/pro ... 21D433A15E

What do you all think?

jchamb · Post by **jchamb** » Fri May 28, 2004 5:44 pm

That looks great to me! If they work properly it's got to be better than constantly trying to adjust the Pimo tool (and cheaper too!)

Post by **KurtHuhn** » Sat May 29, 2004 10:34 am

Looks good, Nick. Let us know how it works out.

Post by **Tyler** » Sat May 29, 2004 11:44 am

Tha set would be cool for making briar plugs to use as sleeves. Any chance you'd be interested in selling me the larger the 5/8" one and maybe the 1/2"? Those are not likely to be good for a stem tenon, but they are the sizes I most use for sleeves.

Tyler

jchamb · Post by **jchamb** » Sat May 29, 2004 5:15 pm

These are sold individually at my local Ace hardware store. Unfortunately they don't carry the 1/4" size, as I thought that might really be handy to have.

I picked up the 3/8" size for $6.99 though.

Post by **Tyler** » Mon May 31, 2004 10:22 am

OK...I'll go check my local Ace Hardware out.

Thanks for the idea!

Tyler

Nick · Post by **Nick** » Mon May 31, 2004 9:32 pm

I picked it up singly as well at Lowes. I would have linked it there, but they didn't show it in their online inventory. But this was the same thing. So far so good. Haven't menned with it all that much just yet.