Page 1 of 1

Adventures in Bamboo: Freehand Pointy Acorn

Posted: Sat Feb 25, 2017 1:21 pm
by DocAitch
This is one of two presentable efforts with bamboo. I find the ebonite spacers a little too thick, but they are helpful with the transitions. They are a devil to polish and I still don't have that down.
I also don't trust a bamboo mortise, so added a piece of briar with a military mount. The over effect is a bit long. In retrospect, I would shorten both the bamboo and the briar.
I did find that I dould gently filee and sand the bamboo, and as long as I didn't go through the skin, it looks pretty good to me.
I also made two stems because he green short one looked a little too short.I prefer the tapered black one both for color and length.
OAL 6.5", Hgt Bowl 2.25", Chamber width 0.79"
Image
Image
Image
Image
Image
Image
This is the first stem. I neglected to get a shot of the second.
Image
This is a profile of the first stem, too short and not enough bend, plus I don't love the color.
DocAitch