pipe stamping

Discussions of tools wether you bought them or made them yourself. Anything from screwdrivers to custom chucks and drilling rigs.
Post Reply
Mouwes123
Posts: 9
Joined: Fri Mar 08, 2013 9:14 pm

pipe stamping

Post by Mouwes123 »

Hello guyes !

I am intersting in pipe stamp with my name .

1. What is the best to buy ? A&m?
2. How can i contect with a&m? Does he have intrenet site?
3. What is the best size for the stamp?
Thank you for helping !!
User avatar
Vermont Freehand
Posts: 526
Joined: Sat Mar 22, 2008 5:31 pm
Location: Dorset, Vermont, USA
Contact:

Re: pipe stamping

Post by Vermont Freehand »

I asked for quotes from 4 companies. Sossner's and Infinity were both about 200-225 per stamp. Paul never emailed me back after 2 attempts at emailing him. I chose to go with Buckeye Engraving, and they were half the price!! Very good stamp, highly recommended. Here's the contact info;

Sean Broadbent
Buckeye Engraving
4485 Crystal Pkwy, Ste. 200
Kent, OH 44240
ph: 330-677-5685
fax: 330-677-3936
www.steelhandstamps.com
stamps@steelhandstamps.com
User avatar
sethile
Posts: 770
Joined: Thu Nov 23, 2006 8:00 pm
Location: Murray, KY
Contact:

Re: pipe stamping

Post by sethile »

Paul at A&M has been doing excellent work for me. I just ordered and received a new year stamp 2014. Just send him an E-mail with what you're interested in and he'll get back to you. His E-mail address is: amsteelstamps@yahoo.com
Scott E. Thile
Collector, smoker, and aspiring pipemaker.
http://sethilepipes.com
Sysop: http://pipedia.org
---------------------
Mouwes123
Posts: 9
Joined: Fri Mar 08, 2013 9:14 pm

Re: pipe stamping

Post by Mouwes123 »

Thank you guyes!!!

And what is the normal size for it?
I saw aome people take to much big ..
Charl
Posts: 1901
Joined: Mon Jan 07, 2008 3:03 pm
Location: South Africa

Re: pipe stamping

Post by Charl »

Keep it small! Look at the stampsize on a couple of pipes before you order and make sure it is as small as possible. The smaller the stamp (while of course being still readable) the easier it will be to use in akward spaces, on thin shanks etc.
Post Reply