Insufficient lathe bed length got you down?

Discussions of tools wether you bought them or made them yourself. Anything from screwdrivers to custom chucks and drilling rigs.
Post Reply
LatakiaLover
Posts: 3120
Joined: Sun Sep 02, 2007 4:29 am
Location: Kansas City, USA
Contact:

Insufficient lathe bed length got you down?

Post by LatakiaLover »

Here's the guaranteed cure.

The shipping is no doubt a bit pricey, but I'm sure it would be worth the piece of mind if Rich Esserman ever called with a commission:

http://www.industrytap.com/worlds-large ... sale/14280

Seems that's a dodgy link ^^^^. Might work for you, might not.

Here it is in a quick video:

http://www.dailymotion.com/video/xsnzhj ... -sale_tech
Last edited by LatakiaLover on Sun Mar 02, 2014 7:51 pm, edited 2 times in total.
UFOs must be real. There's no other explanation for cats.
User avatar
wisemanpipes
Posts: 528
Joined: Wed Jan 16, 2013 12:11 pm
Location: Guelph, Ontario

Re: Insufficient lathe bed length got you down?

Post by wisemanpipes »

LatakiaLover wrote:Here's the guaranteed cure.

The shipping is no doubt a bit pricey, but I'm sure it would be worth the piece of mind if Rich Esserman ever called with a commission:

http://www.industrytap.com/worlds-large ... sale/14280
psshhh childs play
User avatar
andrew
Posts: 1407
Joined: Sun Jun 26, 2011 11:40 am
Location: North Idaho

Re: Insufficient lathe bed length got you down?

Post by andrew »

Whoa.

andrew
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: Insufficient lathe bed length got you down?

Post by d.huber »

wisemanpipes wrote:
LatakiaLover wrote:Here's the guaranteed cure.

The shipping is no doubt a bit pricey, but I'm sure it would be worth the piece of mind if Rich Esserman ever called with a commission:

http://www.industrytap.com/worlds-large ... sale/14280
psshhh childs play
Then I guess my shank face probably wouldn't impress you.
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
User avatar
wisemanpipes
Posts: 528
Joined: Wed Jan 16, 2013 12:11 pm
Location: Guelph, Ontario

Re: Insufficient lathe bed length got you down?

Post by wisemanpipes »

d.huber wrote:
wisemanpipes wrote:
LatakiaLover wrote:Here's the guaranteed cure.

The shipping is no doubt a bit pricey, but I'm sure it would be worth the piece of mind if Rich Esserman ever called with a commission:

http://www.industrytap.com/worlds-large ... sale/14280
psshhh childs play
Then I guess my shank face probably wouldn't impress you.
im sure it would...you always undersell yourself
Last edited by wisemanpipes on Sun Mar 02, 2014 11:23 pm, edited 1 time in total.
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: Insufficient lathe bed length got you down?

Post by d.huber »

Sounds like you may have this confused with a surfing forum. I was innocently comparing lathe sizes and shank faces. Perfectly normal pipe talk. Wherever you got all this wave talk is beyond me.

Sent from my SCH-I535 using Tapatalk
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
User avatar
PremalChheda
Posts: 1213
Joined: Sat Dec 11, 2010 6:03 pm
Location: Columbus, Ohio, USA
Contact:

Re: Insufficient lathe bed length got you down?

Post by PremalChheda »

Thanks alot George! I just blew an hour watching giant lathes and cnc's at work.
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: Insufficient lathe bed length got you down?

Post by d.huber »

d.huber wrote:Sounds like you may have this confused with a surfing forum. I was innocently comparing lathe sizes and shank faces. Perfectly normal pipe talk. Wherever you got all this wave talk is beyond me.

Sent from my SCH-I535 using Tapatalk
This, btw, was sarcasm.
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
User avatar
W.Pastuch
Posts: 415
Joined: Tue May 25, 2010 10:16 am

Re: Insufficient lathe bed length got you down?

Post by W.Pastuch »

PremalChheda wrote:Thanks alot George! I just blew an hour watching giant lathes and cnc's at work.
If I got paid for doing that I would be a rich man.
Post Reply