Advice on my stamp design

Discussions of tools wether you bought them or made them yourself. Anything from screwdrivers to custom chucks and drilling rigs.
Post Reply
User avatar
Jthompson1995
Posts: 186
Joined: Sat Apr 13, 2013 6:32 am
Location: Parkville, MD

Advice on my stamp design

Post by Jthompson1995 »

I am looking at getting a stamp made and would like to get some input on the design from someone who has more experience with this than I do. I did look at many of the threads about stamp sizes but there seems to be a bit of "it depends on the design" vibe when it comes to size and complexity as to whether the stamp would work well.

The design I came up with is a combination of my initials (JLT) similar to how I've been marking stuff I made for years, just more artistic I guess. I was thinking of getting the stamp so the height of the ellipse is right about 0.4 inches high which would make the width about 1/4 inch.

So, if anyone has a few moments, I'd like to hear what your thoughts on the design and size of this design for a stamp. Thanks in advance.

Image
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
User avatar
mightysmurf8201
Posts: 712
Joined: Sat Jan 07, 2012 12:44 pm
Location: Hudson, OH
Contact:

Re: Advice on my stamp design

Post by mightysmurf8201 »

Sort of looks Oriental. Definitely unique, which is a good thing. Very identifiable. One of the biggest problems with coming up with a stamp or trademark in this business, is that most of the good stuff is taken, but is seems you've come up with something different than I've ever seen.
#shellaclivesmatter

Emmanuel Atilano
https://www.instagram.com/atilanohandmade/
User avatar
oklahoma red
Posts: 1084
Joined: Tue Apr 12, 2011 6:14 pm

Re: Advice on my stamp design

Post by oklahoma red »

Are you wanting your initials to be recognized or the "pattern" of your initials?
There are six combinations of your initials: JLT, JTL, LTJ, LJT, TLJ and TJL.
In your design the three letters are overlapping each other so much one cannot be sure of their correct order. So, until such time as the pattern becomes a logo unto itself your initials cannot be recognized to identify you.
Smurf is correct, finding a good one that is unique is tough. Some sort of simple symbol is probably better than initials but of course I could be mistaken.
Chas.
scotties22
Posts: 1767
Joined: Mon Jun 11, 2012 9:43 pm
Location: Missouri
Contact:

Re: Advice on my stamp design

Post by scotties22 »

The most important thing to keep in mind is "how hard is this thing going to be to stamp?". WHAT it is isn't nearly important as the ease of use. My stamp doesn't look anything like my logo. And unless you are Nate (I'm sure I'm forgetting someone else) most makers stamp doesn't match their logo anyway.

My stamp is my last name. So is Jesse's. Brian's is a G inside a circle. Simple is always better and easier to read.

Hope this helps.
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
User avatar
BigCasino
Posts: 384
Joined: Sat Dec 29, 2012 10:36 am

Re: Advice on my stamp design

Post by BigCasino »

I think technically, thirsty wouldn't stamp well due to the little space where all the letters intersect, but that's just my opinion man
N.Burnsworth
Posts: 148
Joined: Sat Jul 14, 2012 8:19 am
Location: Ohio, USA
Contact:

Re: Advice on my stamp design

Post by N.Burnsworth »

When I can afford to, I am changing my stamp as well. I started off just engraving B&B and the number of the pipe. I did that for the first ten pipes. I didn't want mine to get confused with other brands such as Briar Bird, BnB tobacconist, BBB , and a few others. Now I have a fancy lettered and curved Boulder & Briar
With USA underneath of it. It is to detailed of a stamp and with the curved lettering it makes it a pain in the ass to get a good impression. Less is better! And get separate stamps for additional nomenclature such as grading, number, year ect.
Nicholas Burnsworth
Boulder & Briar
User avatar
Jthompson1995
Posts: 186
Joined: Sat Apr 13, 2013 6:32 am
Location: Parkville, MD

Re: Advice on my stamp design

Post by Jthompson1995 »

Thanks for the input everyone.

I had thought of using my last name, but seeing as it's "Thompson", it is quite common. A quick search for Thompson pipes yields at least 3 references to current or former pipe makers/companies with the same name.

I don't necessarily need my initials to be recognizable in the logo but want to keep some kind of continuity since I have been marking things with my initials since I was a kid. I thought this was a more artistic and easier since it will be a single stamp instead of the 3 I currently use.

I saw Abe Herbaugh stamp a pipe at the Midwest gathering and noticed his stamp is fairly detailed.

I likely will try to use this as a logo too if I ever get my act together and get a website and such.

I may try it to see how it goes, it's just money, right?
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
User avatar
Joe Hinkle Pipes
Posts: 804
Joined: Tue Feb 15, 2011 1:39 am
Location: Lafayette Indiana
Contact:

Re: Advice on my stamp design

Post by Joe Hinkle Pipes »

After the feedback I've recently received from other pipemakers about my logo being too busy Im going to change it up to the key and maybe some shortened form of the name. No one has encouraged me to make a busier and more complex amazing looking stamp. If you like the way the initials look, go for it. I think it should be fairly easy to apply.
User avatar
Vermont Freehand
Posts: 526
Joined: Sat Mar 22, 2008 5:31 pm
Location: Dorset, Vermont, USA
Contact:

Re: Advice on my stamp design

Post by Vermont Freehand »

FWIW, keep in mind things like the stroke width of letters and ovals. I have one with my last name (Norse) in cursive with a wider stroke width, and an oval ring. Stamping on a curved surface, sometimes the oval is so fine that it slightly shears the wood, showing a slight line of raw briar (being stamped on a stained pipe). I should have paid more attention to that when designing it, but if I'm careful, it's not a problem. I got my stamp from Sean at Buckeye Engraving and he helped me get the thing fine tuned. They were also half the cost of the competitors, it was something like $100 shipped.
caskwith
Posts: 2196
Joined: Sat Dec 08, 2007 6:00 am

Re: Advice on my stamp design

Post by caskwith »

I would advise against anything circular on design or especially surrounded by a circle. Eagle eyed members may have noticed I don't use my first stamp any more, it was circular and just weeks after ordering it I knew I had made a mistake and ordered a simpler design.
User avatar
Jthompson1995
Posts: 186
Joined: Sat Apr 13, 2013 6:32 am
Location: Parkville, MD

Re: Advice on my stamp design

Post by Jthompson1995 »

Thanks for the insight everyone. I'm glad I waited a bit before ordering the stamp.

Since it seems like the oval may not be the best idea, would just the initials be ok, sans oval? Or should I start from scratch?
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
The Smoking Yeti
Posts: 1346
Joined: Tue Jan 10, 2012 4:55 pm
Contact:

Re: Advice on my stamp design

Post by The Smoking Yeti »

My stamp is circular- but it's very small, and easy to apply.
My pipemaking stream of conscience/ website:

http://yetipipe.tumblr.com/
User avatar
Joe Hinkle Pipes
Posts: 804
Joined: Tue Feb 15, 2011 1:39 am
Location: Lafayette Indiana
Contact:

Re: Advice on my stamp design

Post by Joe Hinkle Pipes »

The Smoking Yeti wrote:My stamp is circular- but it's very small, and easy to apply.
What would you say the diameter is? 5/16-3/8" im guessing. Im working on a stamp now and I would like to use a encircled logo. Its so much work just to get someone to answer an email.
User avatar
PremalChheda
Posts: 1213
Joined: Sat Dec 11, 2010 6:03 pm
Location: Columbus, Ohio, USA
Contact:

Re: Advice on my stamp design

Post by PremalChheda »

Jthompson1995 wrote:Thanks for the insight everyone. I'm glad I waited a bit before ordering the stamp.

Since it seems like the oval may not be the best idea, would just the initials be ok, sans oval? Or should I start from scratch?

Jason,

I like your design as a logo. Better if you also have your name on it. If you decide on the logo, go as small as you can get it, and you should have no problem applying the stamp to a pipe.
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
Post Reply