drilling billiards

For discussion of the drilling and shaping of the stummel.
Post Reply
BobR
Posts: 225
Joined: Wed Feb 08, 2012 8:37 pm

drilling billiards

Post by BobR »

I realize the bowl should cant a few degrees forward. Is this achieved by drilling the bowl perpendicular to the airway then shaping the bowl to get the cant ... or is the bowl actually drilled at a slight angle wrt to the airway.

Thanks!
Bob
User avatar
WCannoy
Posts: 542
Joined: Thu Nov 15, 2012 6:58 pm
Location: Lakeland, Florida
Contact:

Re: drilling billiards

Post by WCannoy »

BobR wrote:I realize the bowl should cant a few degrees forward. Is this achieved by drilling the bowl perpendicular to the airway then shaping the bowl to get the cant ... or is the bowl actually drilled at a slight angle wrt to the airway.

Thanks!
Drill the bowl at a slight forward angle as well!
BobR
Posts: 225
Joined: Wed Feb 08, 2012 8:37 pm

Re: drilling billiards

Post by BobR »

Thanks Walt.
Bob
Post Reply