Fake blast and it's limits....
- archaggelosmichail
- Posts: 188
- Joined: Thu Jul 14, 2011 11:11 am
- Location: Paros, Greece
- Contact:
Fake blast and it's limits....
I found out that some co-makers do great job with faux blasting. I really admire their skill and patience, and the result is more than great, it takes rustication to another level.
The last few weeks though, I saw a guy that uses a sandbaster to track briar's ring grain, then deep rusticates and sell his pipes as "deep blasted" while it's obvious especially in some pipes the total absence of birdseye and akward fusion of the "ring grain" on top and bottom.
BE HONEST GUYS, no need for tricks and lies.....
The last few weeks though, I saw a guy that uses a sandbaster to track briar's ring grain, then deep rusticates and sell his pipes as "deep blasted" while it's obvious especially in some pipes the total absence of birdseye and akward fusion of the "ring grain" on top and bottom.
BE HONEST GUYS, no need for tricks and lies.....
Last edited by archaggelosmichail on Fri Mar 27, 2015 4:27 pm, edited 1 time in total.
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: Fake blast and it's limits....
I have seen this as well. It took me a minute to realize what it is. I'm not entirely sure how I feel about it, I don't think it's okay to lie about what you're doing.
Re: Fake blast and it's limits....
That's just it- it's lying. And why? More skilled a sandblast? Seems like just as much skill with rustication, why not admit both? A true collector will spot it anyway...
Re: Fake blast and it's limits....
If you're lying and stating its only blasting... that's lying, but not disclosing all of the surface treatments... that's just murky, which is fine ![Wink ;)](./images/smilies/icon_wink.gif)
Calling something a deep blast when it's really a combination of blasting and dremel work is a bit of a stretch.
![Wink ;)](./images/smilies/icon_wink.gif)
Calling something a deep blast when it's really a combination of blasting and dremel work is a bit of a stretch.
Andrew
www.andrewstaplespipes.com
www.andrewstaplespipes.com
-
- Posts: 3120
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
Re: Fake blast and it's limits....
The question boils down to "How small does a sandblasting nozzle have to be before it's considered a rustication tool?"
If a stummel is "overall blasted" after first being rusticated with either a fine blasting tip or a rotary cutter, I don't see how it matters which of the two was used.
It's been done for a long time, in any event. I know for a fact at least 30 years, and doubt it was new even then.
If a stummel is "overall blasted" after first being rusticated with either a fine blasting tip or a rotary cutter, I don't see how it matters which of the two was used.
It's been done for a long time, in any event. I know for a fact at least 30 years, and doubt it was new even then.
UFOs must be real. There's no other explanation for cats.
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: Fake blast and it's limits....
I know how to make a seamless fake plateaux texture. Since I can do that, is it right that I add in plateaux to pipes? Does that lessen the achievement for other guys who work really hard to develop the skills to shape with the plateaux? Example being Tonni's Stallion shape.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: Fake blast and it's limits....
I think that if you create something aesthetically pleasing, somebody will buy it. Does it matter how it was achieved? To some people it sure will. And there will be those who could care less. Am I required to advertise that I use delrin tenons vs. integreal tenons because it's way easier to achieve consistent and reliable results that way? I don't think so. If someone asks, will I tell them? Absolutely. I will own anything that I do in my shop. Always have, and people still buy my pipes after 4 yrs of doing this. This may not be on the same level as the label you put on the blast/finish of a high grade pipe, but you get the idea.
-
- Posts: 3120
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
Re: Fake blast and it's limits....
You're over-thinking it, imo. If your result is truly, honestly, and no-kidding 100% indistinguishable from natural plateaux, that's a high level skill in its own right. Probably as difficult to master as the shape-to-fit exercise. There's no need to think of it as intrinsically inferior, just a different route to the same aesthetic destination.The Smoking Yeti wrote:I know how to make a seamless fake plateaux texture. Since I can do that, is it right that I add in plateaux to pipes? Does that lessen the achievement for other guys who work really hard to develop the skills to shape with the plateaux? Example being Tonni's Stallion shape.
Purity for its own sake is common in many artistic fields. It's an emotional thing, not (necessarily) a rational one.
UFOs must be real. There's no other explanation for cats.
- archaggelosmichail
- Posts: 188
- Joined: Thu Jul 14, 2011 11:11 am
- Location: Paros, Greece
- Contact:
Re: Fake blast and it's limits....
Well I didn't say that is not aesthetically pleasing, all I'm saying that either you can make a faux plateaux, a deep sandblast or whatever else to imitate something else just state it. It does matter how it is achieved....
Even if we consinder a fine and small blasting tip a rustication tool, it still requires far more knowledge, machinery and experimentation to achieve it than a rotary tool on a dremel.
Deep blast is great cause it take advantage of the briar natural ring grain AND birdseye...that's why is more lustful from the collectors.
We have seen makers like Cooke, Senatorov ect building their career on this finish.
So having some makers that state that their semi-blasting is a "five stage blast process" is a little irritating...
Even if we consinder a fine and small blasting tip a rustication tool, it still requires far more knowledge, machinery and experimentation to achieve it than a rotary tool on a dremel.
Deep blast is great cause it take advantage of the briar natural ring grain AND birdseye...that's why is more lustful from the collectors.
We have seen makers like Cooke, Senatorov ect building their career on this finish.
So having some makers that state that their semi-blasting is a "five stage blast process" is a little irritating...
Re: Fake blast and it's limits....
I agree. If a guy mimics a sandblast with a 20 hour carving technique, he's a tremendously skilled forger and deserves some credit for that!LatakiaLover wrote:You're over-thinking it, imo. If your result is truly, honestly, and no-kidding 100% indistinguishable from natural plateaux, that's a high level skill in its own right. Probably as difficult to master as the shape-to-fit exercise. There's no need to think of it as intrinsically inferior, just a different route to the same aesthetic destination.The Smoking Yeti wrote:I know how to make a seamless fake plateaux texture. Since I can do that, is it right that I add in plateaux to pipes? Does that lessen the achievement for other guys who work really hard to develop the skills to shape with the plateaux? Example being Tonni's Stallion shape.
Purity for its own sake is common in many artistic fields. It's an emotional thing, not (necessarily) a rational one.
ALL YOUR PIPE ARE BELONG TO US!
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: Fake blast and it's limits....
I dont have a problem with faux sandblasts if people advertise them as such. Tommi is perfectly honest about how he does it, as such I find it amazing and respect it. I just think there's an integrity issue when people lie about what something is. Maybe I'm over-thinking it, I don't know.
-
- Posts: 3120
- Joined: Sun Sep 02, 2007 4:29 am
- Location: Kansas City, USA
- Contact:
Re: Fake blast and it's limits....
I definitely agree with that particular. Knowingly misrepresenting something is indeed lying, whether for marketing or any other purpose. I got caught up (as usual) in the technical aspect and missed the whole integrity thing. Sorry.The Smoking Yeti wrote: I just think there's an integrity issue when people lie about what something is.
Not that part. Good on you, in fact.Maybe I'm over-thinking it, I don't know.
(Your PM about whether or not you should wear your black shoes or your brown ones to your high school prom next week, definitely yes. Just relax and show the girl a good time, OK? We all know first-ever dates are kinda traumatic)
UFOs must be real. There's no other explanation for cats.
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Re: Fake blast and it's limits....
That there is funny.LatakiaLover wrote:Not that part. Good on you, in fact.The Smoking Yeti wrote: Maybe I'm over-thinking it, I don't know.
(Your PM about whether or not you should wear your black shoes or your brown ones to your high school prom next week, definitely yes. Just relax and show the girl a good time, OK? We all know first-ever dates are kinda traumatic)
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: Fake blast and it's limits....
Thanks Uncle George!LatakiaLover wrote: (Your PM about whether or not you should wear your black shoes or your brown ones to your high school prom next week, definitely yes. Just relax and show the girl a good time, OK? We all know first-ever dates are kinda traumatic)
I know you aren't long for the world, so I try to make time for your advice in my life. It has really helped me a lot, and I just want you to know I'll miss it when you're gone!
![Sad :(](./images/smilies/icon_sad.gif)
- Thomas Tkach
- Posts: 137
- Joined: Fri Jan 15, 2010 12:40 am
- Location: Philly-ish
- Contact:
Re: Fake blast and it's limits....
Definitely black shoes.
On land, at sea, at home, abroad,
I smoke my pipe and worship God.
http://tatmakesthings.blogspot.com/
http://www.youtube.com/user/tkachta1?feature=mhee
I smoke my pipe and worship God.
http://tatmakesthings.blogspot.com/
http://www.youtube.com/user/tkachta1?feature=mhee
-
- Posts: 1056
- Joined: Mon Jan 07, 2013 6:25 pm
Re: Fake blast and it's limits....
I agree with Latakia Lover,
If they were to ask, I'd tell them the truth, But they are not privy to what happens in my shop!!!![Gossip :whisper:](./images/smilies/gossip.gif)
If they were to ask, I'd tell them the truth, But they are not privy to what happens in my shop!!!
![Gossip :whisper:](./images/smilies/gossip.gif)