Sandblasting help

Sanding, rusticating, sandblasting, buffing, etc. All here.
User avatar
sandahlpipe
Posts: 2106
Joined: Mon Feb 04, 2013 8:49 pm
Location: Zimmerman, MN
Contact:

Re: Sandblasting help

Post by sandahlpipe »

Whether 13CFM@90PSI is adequate will depend on your blast nozzle, gun, and whether you blast at a higher PSI. The tank size matters less as long as the compressor can maintain the CFM your setup consumes.
---
Fail early, fail often. Your success depends on it.

Jeremiah Sandahl
http://sandahlpipe.com
User avatar
Sasquatch
Posts: 5147
Joined: Tue Jan 13, 2009 1:46 am

Re: Sandblasting help

Post by Sasquatch »

I don't think 13 at 90 is enough no matter what.
ALL YOUR PIPE ARE BELONG TO US!
User avatar
Ratimus
Posts: 337
Joined: Mon Jan 20, 2014 12:55 pm

Re: Sandblasting help

Post by Ratimus »

Back to the drawing board, I guess.
Ryan Richardson
R2 Pipes/Ryan's Luxury Goods
______________________________________
"You can't convince a stupid person that what he's doing is stupid, because the stupidness inside him is telling him that it's smart"
Post Reply