![Image](http://www.hg-doeteberg.net/pfeifen/eb18_01.jpg)
![Image](http://www.hg-doeteberg.net/pfeifen/eb18_02.jpg)
Compared with a "normal sized" Vauen (pipe of the year 2003):
![Image](http://www.hg-doeteberg.net/pfeifen/eb18_04.jpg)
And this was the example:
![Image](http://www.hg-doeteberg.net/pfeifen/eb18_07.jpg)
Unfortuanately the briar shows some spots and flaws! But symetry and functions are good. The air flow was a little bit tricky, because this pipe has a 9 mm filter chamber. But I managed it, so that the draw even with filter is very good.
The pics aren't very good, but we'd stormy weather today and I couldn't take pics by natural light...
The dimensions:
Length over all (measured at the half of the bowl): 140 mm
Length of the stem: 70 mm
Hight overall: 80 mm
Hight of the bowl: 68 mm
Width at the boarder: 37 mm
Width at the middle of the bowl: 54 mm
Airway in the shank: 4 mm
Airway in the stem: 3 mm
Bit: inside v-formed 15 mm long, 1.5 mm inner hight, 4.0 mm outside
Stem: Acrylic with 9 mm filter chamber
Finish: Naturally, carnaubawax
Any comments?
Best regards,
Heinz