Check out this finish!

Sanding, rusticating, sandblasting, buffing, etc. All here.
Post Reply
User avatar
Nick
Posts: 2171
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Connecticut

Check out this finish!

Post by Nick »

This is just an awesome finish, but I have no clue how he did it. Any thoughts?

Image

Here's a link to view better pictures: http://www.senatorov.lv/dmeng.html
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Post by KurtHuhn »

Looks like it was sandblasted, stained, then lightly sandblasted again.
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
User avatar
Danskpibemager
Posts: 85
Joined: Mon Jul 02, 2007 7:42 pm
Location: Illinois
Contact:

Post by Danskpibemager »

Pretty much what Kurt said: sandblasted, contrast stained very dark brown, pencil blasted and an overstain of gold or yellow. Beautiful work and very unique.

Regards,
Kevin
User avatar
LexKY_Pipe
Posts: 875
Joined: Thu Nov 23, 2006 8:00 pm
Location: Lexington, Kentucky USA

Post by LexKY_Pipe »

Reminds me a bit of some of the blasting JT Cooke does.
Craig

From the heart of the Blue Grass.
Lexington, KY

loscalzo.pipes@gmail.com
User avatar
Olivier
Posts: 103
Joined: Tue Jul 22, 2008 8:41 am
Location: South Africa

Post by Olivier »

Danskpibemager wrote:Pretty much what Kurt said: sandblasted, contrast stained very dark brown, pencil blasted and an overstain of gold or yellow. Beautiful work and very unique.

Regards,
Kevin
My thoughts exactly. Looks very good indeed.
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Post by KurtHuhn »

LexKY_Pipe wrote:Reminds me a bit of some of the blasting JT Cooke does.
Somewhere, maybe in the gallery section, Senatorov indicated that he uses a small-orifice sandblaster that he designed himself. He also said it take a few hours to do a pipe.

I've got one of the Cyclone pencil blasters - but honestly, it doesn't move enough air at high enough a rate to be effective on most woods. You can use it to add some detail, but I can see how it would take hours to be effective just by itself. I've seen some pencil blasters with an interesting pressure pot arrangement though which I'd like to try - but they're not cheap.
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
User avatar
xmhr
Posts: 19
Joined: Tue Mar 10, 2009 10:56 am
Location: Lviv/Ukraine
Contact:

Post by xmhr »

As for me it could be rustication, not sandblast. I'll ask Sergey how he did it.
Early to rise, early to bed - makes a man healthy, wealthy and dead. (The Light Fantastic)
Under construction but here it is: http://www.handmade-pipes.com
User avatar
Senatorov
Posts: 228
Joined: Thu May 08, 2008 2:22 pm
Location: Latvija
Contact:

Post by Senatorov »

xmhr wrote:As for me it could be rustication, not sandblast. I'll ask Sergey how he did it.
Rustication i do not do, it is a pity to me briar:).
Pipe Senatorov
www.senatorov.lv
User avatar
xmhr
Posts: 19
Joined: Tue Mar 10, 2009 10:56 am
Location: Lviv/Ukraine
Contact:

Post by xmhr »

O! Shame on me...
PS After seeing tricky rustications from yabuhebi and YakSlon it's hard for me to decide )
Early to rise, early to bed - makes a man healthy, wealthy and dead. (The Light Fantastic)
Under construction but here it is: http://www.handmade-pipes.com
Post Reply