Learning I can't try aggressive angles on pre-boared blocks. Ahhhhhhh (also check out my sweet pink compass)
Learning from my mistakes
Learning from my mistakes
Sean - I Still Suck
http://www.epperspipes.com
http://www.epperspipes.com
Re: Learning from my mistakes
Bummer!
Re: Learning from my mistakes
Ack thats not fun...
- SimeonTurner
- Site Supporter
- Posts: 750
- Joined: Wed Dec 24, 2008 7:46 pm
- Location: Denver, Colorado
- Contact:
Re: Learning from my mistakes
Man, I NEVER did anything like that when I started out...
Also, I have never cracked a shank, mis-drilled a draught hole, or cut a tenon to thin. My crap also smells like roses and fuzzy white bunnies follow me everywhere I go.
Also, I have never cracked a shank, mis-drilled a draught hole, or cut a tenon to thin. My crap also smells like roses and fuzzy white bunnies follow me everywhere I go.
"It is noble to be good; it is still nobler to teach others to be good - and less trouble."
Turner Pipes Website:
http://www.turnerpipes.com
Of Briar and Ashes:
http://turnerpipes.wordpress.com
Turner Pipes Website:
http://www.turnerpipes.com
Of Briar and Ashes:
http://turnerpipes.wordpress.com
Re: Learning from my mistakes
Pipes with three holes are bad.
"Cut your own wood and you warm yourself twice." - Henry Ford
Re: Learning from my mistakes
Hmmmmm....
I usually break through on the bottom, not the side!
I usually break through on the bottom, not the side!
- Mike Messer
- Posts: 546
- Joined: Fri Mar 27, 2009 11:01 pm
- Location: USA
- Contact:
Re: Learning from my mistakes
It could be worse, i.e., mistakes from your learning.
M.M.
M.M.
Mike Messer
http://handmade-briar-usa.com
http://handmade-briar-usa.com
Re: Learning from my mistakes
I was thinking about bedazzling it. Putting a giant ruby right in the middle and selling it at Nordstroms!
Sean - I Still Suck
http://www.epperspipes.com
http://www.epperspipes.com