I know that PME sells the tool and the bands, but thought someone here may have one that they don't use, or perhaps have made thier own. Maybe someone with an idea that will make the job easier, or a tool that I can make that will work just as well and save me some money on the tool itself.
I have a few pipes at times that could use a band, either for asthetics or to repair minor cracks and thought I would ask here first.
Have to save a $$ where we can.
Thanks.
WTB Banding tool and bands!
-
- Posts: 417
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Missouri
- Contact:
WTB Banding tool and bands!
Pipe Maker in the Making!
Re: WTB Banding tool and bands!
I use a parting tool to cut a groove on the shank and epoxy the band on.
Of course this only works when making a pipe, not retrofittiing one.
Todd
Of course this only works when making a pipe, not retrofittiing one.
Todd
Re: WTB Banding tool and bands!
I bought the PME banding tool about a month ago when it was on sale with some bands. While it is nice, it is something that anyone with some good metal working tools could make for themselves relatively cheap. All it is, is a block of steel with metal dowels sticking out to fit various sized mortises. Pretty simple.
-
- Posts: 417
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Missouri
- Contact:
Re: WTB Banding tool and bands!
Pretty much what I thought from looking at the tool. But thought I'd see if anyone had one for sale first. Guess I'll just have to get into the shop and make myself one, then just need to buy some bands.
Pipe Maker in the Making!
- Vermont Freehand
- Posts: 526
- Joined: Sat Mar 22, 2008 5:31 pm
- Location: Dorset, Vermont, USA
- Contact:
Re: WTB Banding tool and bands!
I have one I can part with, one I originally ordered from PME, I also have an assortment of silver bands. Shoot me an offer, we'll go from there, or feel free to pm me.
- Vermont Freehand
- Posts: 526
- Joined: Sat Mar 22, 2008 5:31 pm
- Location: Dorset, Vermont, USA
- Contact:
Re: WTB Banding tool and bands!
smokindawg, I tried to reply to your pm, but it wouldn't let me send it, so here is the reply;
I have both nickel and sterling silver bands. Nickel bands are 7/16" long and I have all diameters from 12mm to 19mm in 0.5mm increments, also have 22mm and 24mm (retail price of $1.75 each).
Sterling bands are 3/4"-13/16" long and diameters are 12mm to 19 mm in 0.5mm increments, (retail price of $5.75 each).
Banding tool retails for $40.00
Let me know what you would like and make an offer on a price.
Thanks, -Steve
I have both nickel and sterling silver bands. Nickel bands are 7/16" long and I have all diameters from 12mm to 19mm in 0.5mm increments, also have 22mm and 24mm (retail price of $1.75 each).
Sterling bands are 3/4"-13/16" long and diameters are 12mm to 19 mm in 0.5mm increments, (retail price of $5.75 each).
Banding tool retails for $40.00
Let me know what you would like and make an offer on a price.
Thanks, -Steve