Everyone already knows the procedure, and I have already looked at this and picked it apart, but I wanted to hear what you guys say so I can get some good feedback and move on to making some more/better pipes.
I will say it's made from a Tinsky kit. Ok grain, not stained, sanded to 600, 85% was using files, 10% dremel(be careful with a dremel when there is a stem around :/ ) and 5% sanding. I had a hard time getting the stem to shiny again, and it is hard to keep a round pipe actually round. So I may stick to pokers for awhile.
Thanks!
Josh
![Image](http://i110.photobucket.com/albums/n114/ChristianAce/IMG_0360.jpg)
![Image](http://i110.photobucket.com/albums/n114/ChristianAce/IMG_0361.jpg)
![Image](http://i110.photobucket.com/albums/n114/ChristianAce/IMG_0362.jpg)
![Image](http://i110.photobucket.com/albums/n114/ChristianAce/IMG_0363.jpg)
This is before I did some shank/bowl connection cleanup
![Image](http://i110.photobucket.com/albums/n114/ChristianAce/IMG_0354.jpg)