Drilling Videos
Drilling Videos
Tyler,
The drilling videos are first rate! You are really offering a valuable tool for beginning pipemakers. I wish I could have seen this when I first purchased my lathe. It would have saved me a bunch of time as the school of hard knocks seems to take awhile.
Watching the videos brings a question to my mind. I have a Delta 4 jaw chuck (with 2 jaws removed) for my Jet lathe and it seems to take forever to get everything lined up. Your chuck made things look easier. Is that operator efficiency or is your chuck just easy to use? What kind is it?
The drilling videos are first rate! You are really offering a valuable tool for beginning pipemakers. I wish I could have seen this when I first purchased my lathe. It would have saved me a bunch of time as the school of hard knocks seems to take awhile.
Watching the videos brings a question to my mind. I have a Delta 4 jaw chuck (with 2 jaws removed) for my Jet lathe and it seems to take forever to get everything lined up. Your chuck made things look easier. Is that operator efficiency or is your chuck just easy to use? What kind is it?
Stephen
Carving Pipes in the Oldest Town in Texas.
Carving Pipes in the Oldest Town in Texas.
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Thanks Stephen. Glad you like it! I have the complete drilling, turning and shaping of the hawkbill on video, I just need to get the whole thing edited.
The chuck I am using is a OneWay scroll chuck. It is self-centering, so that makes it relatively easy to operate. I have really big hands, so that probably helps operate the rather awkward two-rod tightening system. Here's a link to the chuck I use, though I did not get it from this source. Just providing the link for identification:
http://miva3.synergydns.net/Merchant2/m ... acc-oneway
As you can see, it is expensive. Almost as much as I paid for the lathe itself. I bought it used for a good price, otherwise I probably wouldn't have bought it. The jaws are so short that it does not look like a good chuck for the job. It turns out they work surprisingly well though.
Tyler
The chuck I am using is a OneWay scroll chuck. It is self-centering, so that makes it relatively easy to operate. I have really big hands, so that probably helps operate the rather awkward two-rod tightening system. Here's a link to the chuck I use, though I did not get it from this source. Just providing the link for identification:
http://miva3.synergydns.net/Merchant2/m ... acc-oneway
As you can see, it is expensive. Almost as much as I paid for the lathe itself. I bought it used for a good price, otherwise I probably wouldn't have bought it. The jaws are so short that it does not look like a good chuck for the job. It turns out they work surprisingly well though.
Tyler
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
I was fortunate enough to barter for my Jet lathe and Oneway chuck in exchange for drawing lessons. You cannot go wrong with the Oneway. It is well worth the money.
One major difference I see between the Delta that Tyler was using and my jet is that the access door to the belts is in front. On the jet it is in back and a bit of a pain to change speeds.
One major difference I see between the Delta that Tyler was using and my jet is that the access door to the belts is in front. On the jet it is in back and a bit of a pain to change speeds.
John
www.crosbypipes.com
www.crosbypipes.com
Artguy,
You are right about the backdoor access on the Jet being a pain. I solved the problem by building a large island style table that I have set up with several work stations. The legs have locking casters so I can move it out of the way if I need to. My Jet lathe station is at one end of the table so I can just step around to the side and change the belts. It looks something like this from a bird's eye view:
___________________________
l ----- l
l l l l
l l l ---------Jet lathe
l l l l
l ----- l
l__________________________ l
In addition to the Jet station, I have stations on the table for my bandsaw, Taig, belt sander, grinder, and an area that will become my sanding station.
You are right about the backdoor access on the Jet being a pain. I solved the problem by building a large island style table that I have set up with several work stations. The legs have locking casters so I can move it out of the way if I need to. My Jet lathe station is at one end of the table so I can just step around to the side and change the belts. It looks something like this from a bird's eye view:
___________________________
l ----- l
l l l l
l l l ---------Jet lathe
l l l l
l ----- l
l__________________________ l
In addition to the Jet station, I have stations on the table for my bandsaw, Taig, belt sander, grinder, and an area that will become my sanding station.
Stephen
Carving Pipes in the Oldest Town in Texas.
Carving Pipes in the Oldest Town in Texas.
- Jeffery_Suter
- Posts: 81
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: NJ - NYC
- Contact:
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Jeff, you need to either:
- install Windows Media Player ( http://www.microsoft.com/mac/ )
or
- install VideoLAN Client ( http://www.videolan.org/vlc/ )
I've done the latter, but have not actually had a chance to view Tyler's videos. VLC isn't foolproof, and it doesn't support *all* the CODECs out there, but it comes close.
- install Windows Media Player ( http://www.microsoft.com/mac/ )
or
- install VideoLAN Client ( http://www.videolan.org/vlc/ )
I've done the latter, but have not actually had a chance to view Tyler's videos. VLC isn't foolproof, and it doesn't support *all* the CODECs out there, but it comes close.
- Jeffery_Suter
- Posts: 81
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: NJ - NYC
- Contact:
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Wierd. Well, if it's any consolation, the Windows Media Player guys that develop the software and CODECs for the Windows version, are pretty much a seperate business entity from the guys that develop the OS X version. Rarely do the two units ever exchange info.
Hmm. That's no consolation is it? Well, at least you understand the reason why, anyway.
Hmm. That's no consolation is it? Well, at least you understand the reason why, anyway.
- Tyler
- Site Supporter
- Posts: 2376
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Farmersville, TX
- Contact:
Jeff,
You can still see the old videos though?
I don't know what might be different about them. Oh wait! I think I have upgraded Movie Maker between the first videos and the most recent ones. I have no idea why that might matter, but that is the main change.
I don't know what the issue might be though.
Tyler
You can still see the old videos though?
I don't know what might be different about them. Oh wait! I think I have upgraded Movie Maker between the first videos and the most recent ones. I have no idea why that might matter, but that is the main change.
I don't know what the issue might be though.
Tyler
Tyler Lane Pipes
http://www.tylerlanepipes.com
http://www.tylerlanepipes.com
- Jeffery_Suter
- Posts: 81
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: NJ - NYC
- Contact: