Briar for Cheap?
Briar for Cheap?
I have almost completed my first pipe kit and I am itching to try more, however with my skill level I can't really justify spending $17-25 per block for briar plus a stem. Is there a good resource for cheap briar? I understand it may not be the same quality as the $20 per block material, but I figure that it won't matter with my skill set.
Re: Briar for Cheap?
I get my basic blocks from Jaume Hom over at Briarblocks.com (in Spain).
His shipping is rather pricey, but apart from that he has decent quality blocks for cheap. Decent sized ebouchons in extra grade are €75 (= USD 103) for 25 so just over 4$ a piece.
Including shipping to the US they would run you 180$ for 25 blocks which is 7.2$ each...
PS: if you would order from him and want to order different types of blocks (small, large, extra and extra extra, whatever), mail him for an updated shipping cost instead of ordering through the webshop, that will save you considerably in shipping. I just paid €60 for shipping 3 different types of blocks, which would have been over €100 if I'd ordered through the webshop.
Tim west at JH lowe is also a great guy, his small blocks start as low as $4.5/each , if you want "seconds" aka lower quality blocks you can even get them for half of normal price which would get you extra large ebouchons for less than $10 each.
http://jhlowe.com/briar.htm
And then ofcourse there are vendors on ebay such as Samantha in Greece or alexander-zavvos who have cheaper blocks in their listings as well.
His shipping is rather pricey, but apart from that he has decent quality blocks for cheap. Decent sized ebouchons in extra grade are €75 (= USD 103) for 25 so just over 4$ a piece.
Including shipping to the US they would run you 180$ for 25 blocks which is 7.2$ each...
PS: if you would order from him and want to order different types of blocks (small, large, extra and extra extra, whatever), mail him for an updated shipping cost instead of ordering through the webshop, that will save you considerably in shipping. I just paid €60 for shipping 3 different types of blocks, which would have been over €100 if I'd ordered through the webshop.
Tim west at JH lowe is also a great guy, his small blocks start as low as $4.5/each , if you want "seconds" aka lower quality blocks you can even get them for half of normal price which would get you extra large ebouchons for less than $10 each.
http://jhlowe.com/briar.htm
And then ofcourse there are vendors on ebay such as Samantha in Greece or alexander-zavvos who have cheaper blocks in their listings as well.
Website: http://www.massispipes.com
Instagram : http://instagram.com/massispipes
Twitter: https://twitter.com/MassisPipes
Facebook: https://facebook.com/MassisPipes
Instagram : http://instagram.com/massispipes
Twitter: https://twitter.com/MassisPipes
Facebook: https://facebook.com/MassisPipes
Re: Briar for Cheap?
Vermont Freehand has briar starting at $5.00 a block. His blocks seem to be larger than others that I’ve seen. I started with twenty of his $5.00 blocks Grade 3 Plateaux and Grade 1 Ebauchons.
viewtopic.php?f=21&t=7946
viewtopic.php?f=21&t=7946
Artisans never finish their work – they merely abandon it.
Ideally, they abandon it at that point, where they are not sure if change, will improve or diminish it.
(Paraphrase from an unremembered source).
Steve / jjpipes
Ideally, they abandon it at that point, where they are not sure if change, will improve or diminish it.
(Paraphrase from an unremembered source).
Steve / jjpipes
- Jthompson1995
- Posts: 186
- Joined: Sat Apr 13, 2013 6:32 am
- Location: Parkville, MD
Re: Briar for Cheap?
I got a bunch of Vermont Freehand's mini blocks (grade 3 plateaux and grade 1 ebauchon Algerian blocks) for $5 each and was very pleased with the quality. Not one block I couldn't make a pipe from and a couple I got 2 out of. And don't let the mini fool you, they are generously sized blocks.
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
-Walter Blodget
Re: Briar for Cheap?
Thanks. That is more like it. I cam afford $5 a block, and when I screw up the first 50 I won't be completely broke.
-
- Posts: 1346
- Joined: Tue Jan 10, 2012 4:55 pm
- Contact:
Re: Briar for Cheap?
Go with Vermont Freehand for sure. He has some very affordable stuff in stock.
- Vermont Freehand
- Posts: 526
- Joined: Sat Mar 22, 2008 5:31 pm
- Location: Dorset, Vermont, USA
- Contact:
Re: Briar for Cheap?
Hi jholder, Let me know if you want some briar sent out. You can private message me here, or by direct email, stevenorse at gmail.com