while I was looking at the picts I could see the lines need major improvement but fire away. thanks
first eskimo
- sandahlpipe
- Posts: 2106
- Joined: Mon Feb 04, 2013 8:49 pm
- Location: Zimmerman, MN
- Contact:
Re: first eskimo
Seems everybody is making Eskimos lately and they all have two errors in common.
1. The shank pinches towards the stem shank junction.
2. The bowl is about twice as tall as it should be.
The result is a chunky amorphous piece.
Sent from my iPhone using Tapatalk
1. The shank pinches towards the stem shank junction.
2. The bowl is about twice as tall as it should be.
The result is a chunky amorphous piece.
Sent from my iPhone using Tapatalk
Re: first eskimo
I'll fix that in the future. Thanks again for the feedback
Re: first eskimo
Aaaaaand the widest point on the shank should be at the widest point for the bowl. Not the same width, mind you, just the widest point.sandahlpipe wrote:Seems everybody is making Eskimos lately and they all have two errors in common.
1. The shank pinches towards the stem shank junction.
2. The bowl is about twice as tall as it should be.
The result is a chunky amorphous piece.
Sent from my iPhone using Tapatalk