I have a bunch of threads on bamboo shanks bookmarked. I'll post the links once the voting is officially done.seamonster wrote:... but, I'm not sure I'll even know the right questions to ask.... I say this as I'm rushing off to begin an exhaustive search for 'bamboo shank how to's' in the back catalog....
PITH 2015
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
- PremalChheda
- Posts: 1213
- Joined: Sat Dec 11, 2010 6:03 pm
- Location: Columbus, Ohio, USA
- Contact:
Re: PITH 2015
Good points, and I like the attitude. I will be happy to lend some guidance in the process as well.seamonster wrote:I agree with this, whole-heartedly, and while I fall into the latter category (green, clueless, but eager) I'm willing to give it a go. The resources here are massive, and everyone is so helpful... but, I'm not sure I'll even know the right questions to ask.... I say this as I'm rushing off to begin an exhaustive search for 'bamboo shank how to's' in the back catalog....mightysmurf8201 wrote:I think that is a valid concern. That being said, and this might sound a little harsh but it's meant in the best possible way, my personal philosophy is that success usually only comes through trial, error, and experiencing/overcoming failure and difficulties. If we end up doing a bamboo shank, some of us, including myself, will probably ruin some bamboo before this thing is done, but some good lessons will probably be learned, and that is what I see as one of the purposes that the PITH serves.PremalChheda wrote:Just a note on "Bamboo sitter" The people that are experienced will not have any issues with making and equipment, but those that are new may run into some serious limitations if they do not have the equipment or experience on the equipment and processes. What do you all think?
One of the main functions of this forum will also be served in that the less experienced will for sure be calling on the more experienced for guidance and help. I believe that one of the main reasons this forum exists is so that we can help each other grow. Regardless of what shape is chosen, I have no doubt that these things will, and should, happen. My $.02 Not saying I'm right, just saying that's my perspective.
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
- seamonster
- Posts: 380
- Joined: Fri Feb 21, 2014 12:43 am
- Location: Portland, OR
Re: PITH 2015
PremalChheda wrote:
Good points, and I like the attitude. I will be happy to lend some guidance in the process as well.
Awesome, both of you, mightysmurf, included! That's why we're all here, eh? Thanks fellas.
cheers,
Jeremy.
instagram.com/seamonster_workshop/
- oklahoma red
- Posts: 1084
- Joined: Tue Apr 12, 2011 6:14 pm
Re: PITH 2015
Last night I attended the first meeting of the year for the OKC Pipe Club. Tyler graciously hosted it at his home in Edmond, OK.
I was able to pick his brain for tips on working with bamboo and he gave me a nice piece from his stock. THANKS TYLER!
I would encourage those that have not utilized this material before to check out his bamboo blurb on Pipedia http://pipedia.org/wiki/Bamboo_Shanks.
I was able to pick his brain for tips on working with bamboo and he gave me a nice piece from his stock. THANKS TYLER!
I would encourage those that have not utilized this material before to check out his bamboo blurb on Pipedia http://pipedia.org/wiki/Bamboo_Shanks.
Re: PITH 2015
I'd like to join in, I'm not super experienced but if it's ok if I join in then i'll do my best
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
Sure thing Josh! You've been added. Welcome.Josh B. wrote:I'd like to join in, I'm not super experienced but if it's ok if I join in then i'll do my best
Re: PITH 2015
thanks, glad to be a part of the pith
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
You've been added.heri wrote:im also in!
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
It's official. Sitter with a bamboo shank, and it can't be a poker. This should be interesting!
- sandahlpipe
- Posts: 2106
- Joined: Mon Feb 04, 2013 8:49 pm
- Location: Zimmerman, MN
- Contact:
Re: PITH 2015
Ok. I've finally come around. Count me in.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
You've been added, Jeremiah.
- seamonster
- Posts: 380
- Joined: Fri Feb 21, 2014 12:43 am
- Location: Portland, OR
Re: PITH 2015
Okay, pacing the bedroom floor at 3am with the baby last night, I thought of a question: I've been reading Tyler's bit on pipedia, and it's super helpful but I wonder about one thing. How does one shape the transition from briar to vulcanite sliver to bamboo once it's all drilled and glued up? I seem to remember reading that you shouldn't sand the bamboo. But it seems to me to fit everything flush you would need to file and sand them together... (unless you're George, who's ninja skills allow him to flush shape without touching...). So, glue everything up and file and sand together? or DON'T TOUCH THE BAMBOO?
thanks fellas, Jeremy.
thanks fellas, Jeremy.
instagram.com/seamonster_workshop/
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
Here's what I've found so far. I think the 3rd link down addresses the shaping at the junction.
viewtopic.php?f=9&t=9623
viewtopic.php?f=9&t=2041
viewtopic.php?f=10&t=2409
viewtopic.php?f=9&t=4748
viewtopic.php?f=10&t=6445
viewtopic.php?f=9&t=7451
viewtopic.php?f=9&t=8282
viewtopic.php?f=10&t=9223
viewtopic.php?f=9&t=9623
viewtopic.php?f=9&t=2041
viewtopic.php?f=10&t=2409
viewtopic.php?f=9&t=4748
viewtopic.php?f=10&t=6445
viewtopic.php?f=9&t=7451
viewtopic.php?f=9&t=8282
viewtopic.php?f=10&t=9223
- Literaryworkshop
- Posts: 275
- Joined: Thu Feb 28, 2013 3:57 pm
- Location: Alabama Gulf Coast
- Contact:
Re: PITH 2015
Question about the definition of "sitter." Does it have to sit on the bottom of the bowl only (i.e. without the stem/button touching the table), or can it just balance upright when you set it down, no matter how?
- Steve S.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
My assumption was that it would have to sit on it's own, just the bowl/stummel. Mainly one point of contact, although there are some sitters with more than one point of contact, but those are rare, but do exist. If you think about it, there are plenty of pipes that would be called sitters that are actually not, if you broaden the definition. I've pretty much settled on doing a cutty.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
These pipes would be examples of sitters with more than one point of contact, just for reference.
http://www.florovpipes.com/FlorovPipes- ... =PL1104270
http://www.smokershaven.com/andrew-pete ... amper.aspx
http://gbatsonpipes.com/portfolio-items ... led-wanda/
http://www.florovpipes.com/FlorovPipes- ... =PL1104270
http://www.smokershaven.com/andrew-pete ... amper.aspx
http://gbatsonpipes.com/portfolio-items ... led-wanda/
- Vermont Freehand
- Posts: 526
- Joined: Sat Mar 22, 2008 5:31 pm
- Location: Dorset, Vermont, USA
- Contact:
Re: PITH 2015
I'm in !!
I have some bamboo seconds if anyone wants some, they are half price of the regular bamboo.
For those of you who have not delved into bamboo shanks, there is a good explanation on pipedia;
http://pipedia.org/wiki/Bamboo_Shanks
I have some bamboo seconds if anyone wants some, they are half price of the regular bamboo.
For those of you who have not delved into bamboo shanks, there is a good explanation on pipedia;
http://pipedia.org/wiki/Bamboo_Shanks
Re: PITH 2015
I'd love to take part. I'm a newbie but I'm here to learn.