16 hours and I have a smokeable pipe. Much to improve on. Like A LOT! Went through 4 blocks to get this one right, then 10 hours later I had a finished stummel. Another 6 hours of trial and error an I had a poorly shaped hand cut stem from acrylic.
It is going to my dad as a gift and he wanted it a plateau freehand as red as could be, so I think he'll like it. A labor of love for sure.
My First Pipe, a Freehand for Dad
-
- Posts: 177
- Joined: Fri Apr 24, 2015 2:34 pm
My First Pipe, a Freehand for Dad
Acting like a loon in the front yard, close to the road.
-
- Posts: 39
- Joined: Sun Nov 09, 2014 12:47 pm
Re: My First Pipe, a Freehand for Dad
As I'm sure you'll hear, it's tough to critique a freehand as there are no standards. Your finish looks decent but need to go back and work on the bit. Still looks squared and can't imagine that would be very comfortable for the smoker.
-Pat
-Pat
- Literaryworkshop
- Posts: 275
- Joined: Thu Feb 28, 2013 3:57 pm
- Location: Alabama Gulf Coast
- Contact:
Re: My First Pipe, a Freehand for Dad
I'm sure your dad will appreciate it.
As said above, it's tough to comment on a freehand, but I'll venture one or two suggestions should you attempt a pipe like this in the future. Pipes with facets can be really cool, but the facets should be symmetrical and parallel. In the top view, the sides of the pipe look like they wanted to be parallel but couldn't quite line up. A nice, even rectangle profile (when looked at from above) would have been ideal. From the side view, I think the pipe looks a little better. Drilling a counter-sink for the stem, so there's no gap between the tenon shoulder and the briar, would have gone a long way toward making the pipe look more finished.
Now go make another pipe, and see what happens.
As said above, it's tough to comment on a freehand, but I'll venture one or two suggestions should you attempt a pipe like this in the future. Pipes with facets can be really cool, but the facets should be symmetrical and parallel. In the top view, the sides of the pipe look like they wanted to be parallel but couldn't quite line up. A nice, even rectangle profile (when looked at from above) would have been ideal. From the side view, I think the pipe looks a little better. Drilling a counter-sink for the stem, so there's no gap between the tenon shoulder and the briar, would have gone a long way toward making the pipe look more finished.
Now go make another pipe, and see what happens.
- Steve S.
-
- Posts: 177
- Joined: Fri Apr 24, 2015 2:34 pm
Re: My First Pipe, a Freehand for Dad
Thanks for the feedback and I totally understand. Pipe two is going to be a cherry wood shape. We'll see how it goes without having to worry about the plateau.
My dad loves the pipe, he smoked it today.
My dad loves the pipe, he smoked it today.
Acting like a loon in the front yard, close to the road.
- Literaryworkshop
- Posts: 275
- Joined: Thu Feb 28, 2013 3:57 pm
- Location: Alabama Gulf Coast
- Contact:
Re: My First Pipe, a Freehand for Dad
Lucky Dad!
Sent from my HTC0P3P7 using Tapatalk
Sent from my HTC0P3P7 using Tapatalk