Page 1 of 1
3/4 bent with cumberland and cocobolo
Posted: Tue Aug 02, 2016 11:04 am
by calsbeek
- IMG_2632.JPG (103.73 KiB) Viewed 2239 times
Still improving. The shank clearly flares a bit and I'd like the stem to bend more gracefully.
not sure why the last image (2364) won't load but its there...
Re: 3/4 bent with cumberland and cocobolo
Posted: Tue Aug 02, 2016 4:44 pm
by Charl
The shank and stem makes this look "top heavy" because of that flare. Maybe thin it down so that it fits the bowl better? The stem could also have been shorter.
Re: 3/4 bent with cumberland and cocobolo
Posted: Tue Aug 02, 2016 5:27 pm
by baweaverpipes
With the shank getting larger from cheeks to mortise, it lacks flow and that's all I see. My eyes became fixated on the lack of a graceful flow.
If you would lightly taper from the cheeks and soften the bend in the stem, you would have a pretty piece.
The stem is long, but a graceful bend would help. You need to start the bend very close to the mortise.
Re: 3/4 bent with cumberland and cocobolo
Posted: Thu Aug 04, 2016 4:32 pm
by calsbeek
Thank you gents
