Poker #1 - first drilled and shaped pipe
Posted: Thu Apr 13, 2017 12:10 pm
Here is my first attempt at a pipe in which I did all of the drillings and also created the stem. I learned a ton on this pipe (did you know a pipe can reach the side of my shop in under a second, things like a briar missile when the buffer catches it...) I know there are issues that I see: The stem needs to be sanded/shaped better before polishing. The main cylinder is a little wonky on the bottom, I lost the straight cylinder due to it being my first ever time shaping on a wheel. The shank is short, I cracked it when fitting the stem so I had to trim about an inch+ off of it. There are a few gouges in the side of the pipe, *see briar missile above... I can live with most of these for my first attempt, but what is really getting me is the stem not meeting the shank flush, after I cracked and redrilled the shank I could not for the life of me get it squared off again. Doc offered advice on how to fix it using a custom dowel sander in the lathe, I still may try that. I know this pipe has a lot of issues but I am happy with how it turned out for my first full attempt. Sandahl also gave advice on making the bowl walls about half the width they currently are, but I really like the chunky look so I rolled with it this time. Sidenote: the photos show the top of the bowl and the end of the shank as being rough, it is just compressed pictures, they are indeed nice and smooth and slightly beveled/rounded.
Questions I have: For stem shaping I am using a 1/2" sanding belt on my bandsaw, which is not the easiest... Do you all shape on your sanding wheels? I need to purchase some small files for the stem and also a dremmel, any specific sets of files or dremmel bits you all use? Other than what I see as issues, what do you all think? I want to get better, so let me have it!
Questions I have: For stem shaping I am using a 1/2" sanding belt on my bandsaw, which is not the easiest... Do you all shape on your sanding wheels? I need to purchase some small files for the stem and also a dremmel, any specific sets of files or dremmel bits you all use? Other than what I see as issues, what do you all think? I want to get better, so let me have it!