Page 1 of 1

2019 NAPCC Entry- NOT!

Posted: Sun Sep 08, 2019 1:14 pm
by DocAitch
I hadn’t planned to show my NAPCC entry this year, but circumstances have dictated otherwise, because this baby ain’t making the trip.
Image
Had the box open on the bench with sleeve and packing material handy, but decided the stem need just a tad more time with the White Diamond.
I have a net for under the buffer, but I didn’t need it for a little stem buff (really?).
Ah, well...... I have a new shop pipe (after a bit of epoxy and maybe SS tubing) which has a name- Awww F*****K (sounds vaguely Chinese, eh?), and to which is attached a cautionary tale.
Well on to plan B- which involves a 3 hour drive back from the beach to finish one of the other contenders.
DocAitch

Re: 2019 NAPCC Entry- NOT!

Posted: Sun Sep 08, 2019 2:37 pm
by LatakiaLover
Doc ---

Do NOT open the airway to ss tube diameter first and then assemble w/glue. It won't line up. (I could explain, but am not in a typing mood. Just trust me.)

Instead, glue the shank back together, THEN open to ss tube "smooth slip fit" diameter to within appx 5/16" of the chamber, and glue in the sanded-for-texture tube.

The length of the tube should be exactly from the small step at the 5/16" mark to the bottom of the mortise.

Re: 2019 NAPCC Entry- NOT!

Posted: Sun Sep 08, 2019 3:00 pm
by DocAitch
George,
Got it.
Thank you.
I had considered the difficulties in making a tube diameter counter bore which was concentric and parallel in two oieces which would also line up the outer surface of the shank and it did appear to be a task fraught with potential screw ups.
Walt

Re: 2019 NAPCC Entry- NOT!

Posted: Sun Sep 08, 2019 10:17 pm
by seamonster
ooh! now that is a top-notch, had to figure it out but ducking it up first (or be thoughtfully brilliant like the good Doc...) piece of advice.....

yes, plus one too the forum.



Sent from my bloopty-bloop, using hooty-hoo.


Re: 2019 NAPCC Entry- NOT!

Posted: Sun Sep 08, 2019 10:17 pm
by seamonster
PS serious bummer about the pipe... hope you have a chance to finish another one up.

Sent from my bloopty-bloop, using hooty-hoo.


Re: 2019 NAPCC Entry- NOT!

Posted: Sun Sep 08, 2019 10:51 pm
by ronps
Sorry, buddy.

Re: 2019 NAPCC Entry- NOT!

Posted: Mon Sep 09, 2019 7:09 am
by cpd2186
Sorry Walt!!!!!!

Re: 2019 NAPCC Entry- NOT!

Posted: Mon Sep 09, 2019 1:36 pm
by LatakiaLover
More info (explanation & demonstration) for anyone interested:

https://www.youtube.com/playlist?list=P ... ybmGb6DX8k

Re: 2019 NAPCC Entry- NOT!

Posted: Sat Sep 14, 2019 3:03 pm
by DocAitch
Well, I drove 3 hours back from the beach and finished the 2 pipes that were in the queue for the NAPCC.
One is in the box headed for KC.
It’s pretty OK if you ask me🙄. No photos until after next week end since a couple of judges haunt this forum.
Now I’m back at the beach enjoying the grandchildren, sun, and sand.