Page 1 of 1
Pipe stamp source?
Posted: Tue Mar 27, 2007 7:25 pm
by flix
Hi All,
I've done a search for this, without any results. I'm ready to purchase a stamp for my pipes, but, have no idea where to go.
Where did you get your stamp? Was it custom or off the shelf? How much did it cost for either custom or off the shelf?
Thanks,
--Michael
Posted: Tue Mar 27, 2007 7:49 pm
by Tano
Posted: Fri Sep 08, 2006 7:01 am Post subject:
--------------------------------------------------------------------------------
A&M Stamps
55 Windsor Avenue - Mineola, NY 11501
PH:516-741-6223 FAX: 516-248-4202
Paul Argendorf
Some pipe makers have Paul make their stamps. I had one recently made. It's designed to cut into the briar. You roll the stamp onto the wood. He charges in the range of $140 for a custom stamp.
_________________
Craig
Here you go buddy.
Posted: Tue Mar 27, 2007 11:04 pm
by flix
Thank you Craig. I've sent him an email at this address:
amsteelstamps@yahoo.com
Posted: Thu Mar 29, 2007 5:02 pm
by Frank
@flix
Do a google search for "custom steel logo stamps". You'll get loads of hits to choose from.
This one cost me $120, 3/16" high:
I forget where I bought it.
Paul A&M Steel Stamps
Posted: Thu Mar 29, 2007 9:03 pm
by KenLamb
Paul is the best in the business and a true gentleman.
If you can draw it, he can turn it into a steel stamp.
Ask his advise as well, he has been making stamps for pipe makers for years. What may look good to you may be too busy on a shank. Paul is good for this type of advise.
Posted: Thu Mar 29, 2007 11:55 pm
by RadDavis
Paul is the best in the business and a true gentleman.
If you can draw it, he can turn it into a steel stamp.
Ask his advise as well, he has been making stamps for pipe makers for years. What may look good to you may be too busy on a shank. Paul is good for this type of advise.
Amen, brother!
Rad