pipemakersforum.com

I have Bee hives, so I have a surplus of beeswax

Can you use bees wax as a finish or would I have to prepare it in any way.

Too soft to use on pipes to sell, doesn't develop a high enough gloss and rubs off too easily. No reason you can't use it yourself, though. Lots of guys use it to color meerschaum pipes.

Almost all of the pipemakers use pure Carnauba wax as a final finish.

I was experimenting a while back and dipped a pipe I had made. I had a batch of beeswax melted because I was potting some pickups for a guitar, so I decided to see how it would look. It wasn't bad, but as Jack mentioned, it didn't get to a high polish. I found it a pleasant satin sheen, however. It also had a nice beeswax odor during the first several smokes, and with the right tobacco, it was very nice. I just used a cork to plug the tobacco chamber so nothing got in there, and held it under for about 45 seconds or so. I haven't done any since - not for any good reason though.

What if I took the wax, mixed it with equal parts turpentine, and linseed oil... I would still have to ad some kind of finish to it wouldn't it?

What if I used Shellac rubbed it on the wood and what not, do some sanding, then use the Bees Wax oil finish? Ad a couple coats, and buff?

I don't think beeswax would serve any purpose in the formulation you describe, which is heading toward a rubbing finish, like a French polish. You're on the right track with shellac if that's the finish you want. The beeswax will always be soft and slightly dull. Don't let me discourage you, though, nothing to be lost by giving it a go.

nepenthes wrote:What if I took the wax, mixed it with equal parts turpentine, and linseed oil... I would still have to ad some kind of finish to it wouldn't it?

It's possible I'm preaching to the choir on this, but make sure you use the deodorized stuff. The other stuff stinks for ages.

The only pipemaking use I have yet found for beeswax is in finishing meerschaums. Dipping a hot meer in liquid beeswax will get enough wax into the material to produce decent coloring.