Any interest in the SEM swirls?
Any interest in SEM Swirls?
Kurt,
Did you get my pm where I ordered the rods?
Thanks,
Skip Elliott
Did you get my pm where I ordered the rods?
Thanks,
Skip Elliott
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Skip, just checking if you get my email.
For the rest of you guys, if you want swirls - either partial or whatever, let me know. SEM produced every color, including the brown/black and tan/black this week, and they're vulcanizing now as I type this. They'll be ready for shipping on Monday/Tuesday. I've got some free time here (finally!!) and I'd like to get this wrapped up ASAP. Please send me an email, it's easier for me to keep track of than forum posts.
If you're going in halfsies or whatever with some folks, just one of you should place an order - I don't want to be adding up and trying make whole rods out of partial rod orders. I will, however, cut the rods and ship to multiple people. Let me know if this is the case, as I'll need to make sure I've covered all the shipping charges.
BTW, I'm in for whole rods myself, though I could be persuaded to allow retail sales of them after the fact. In other words, if you buy my stock, you don't get the group buy price. Pipe makers have to eat too, ya know.
I'll email everyone tonight and tomorrow who already placed an order to confirm the amount they want.
And in a fit of thread convergence, I am shipping out all the black rods from the previous group buy on Friday afternoon and Saturday morning.
For the rest of you guys, if you want swirls - either partial or whatever, let me know. SEM produced every color, including the brown/black and tan/black this week, and they're vulcanizing now as I type this. They'll be ready for shipping on Monday/Tuesday. I've got some free time here (finally!!) and I'd like to get this wrapped up ASAP. Please send me an email, it's easier for me to keep track of than forum posts.
If you're going in halfsies or whatever with some folks, just one of you should place an order - I don't want to be adding up and trying make whole rods out of partial rod orders. I will, however, cut the rods and ship to multiple people. Let me know if this is the case, as I'll need to make sure I've covered all the shipping charges.
BTW, I'm in for whole rods myself, though I could be persuaded to allow retail sales of them after the fact. In other words, if you buy my stock, you don't get the group buy price. Pipe makers have to eat too, ya know.
I'll email everyone tonight and tomorrow who already placed an order to confirm the amount they want.
And in a fit of thread convergence, I am shipping out all the black rods from the previous group buy on Friday afternoon and Saturday morning.
Any interest in SEM Swirls?
I goy it.
Thanks,
Skip
Thanks,
Skip
Purchasing partner for partial rods?
Hope it's not too late. Just emailed my swirly request, Kurt.
Anybody interested in partial rods? I would be interested in half rods (1.5 ft) or less of swirly colors in blue, yellow, green, or tan AND solid "uni" colors of red, blue, or green.
I am already ordering complete rods of red and brown swirls, but I might be willing to divide. Please email or PM me if you are interested, so I can hurry up and amend my order, if it isn't too late already.
Anybody interested in partial rods? I would be interested in half rods (1.5 ft) or less of swirly colors in blue, yellow, green, or tan AND solid "uni" colors of red, blue, or green.
I am already ordering complete rods of red and brown swirls, but I might be willing to divide. Please email or PM me if you are interested, so I can hurry up and amend my order, if it isn't too late already.
Get in on this now, get in on this quick!
SEM has turned out some fantastic looking swirls on this production run. Not that no direction random swirl thing, this stuff looks like the real cumberland deal and has a wonderful wood grain effect when shaped. AND they have colors now that you've never seen in cumberland before. I have a feeling they are going to run out of this stuff quick, since SEM just sent out emails with the pics. Get in on this! Contact Kurt and update your orders, ASAP!
I'm not sure what to make of these solid sheets. They must be ebonite. Could make nice accents/rings or whatevers. Not sure if they have them in rods or not. Post your interest in them, if you have any, and maybe we can divide uni-color rods, if available.
SEM has turned out some fantastic looking swirls on this production run. Not that no direction random swirl thing, this stuff looks like the real cumberland deal and has a wonderful wood grain effect when shaped. AND they have colors now that you've never seen in cumberland before. I have a feeling they are going to run out of this stuff quick, since SEM just sent out emails with the pics. Get in on this! Contact Kurt and update your orders, ASAP!
I'm not sure what to make of these solid sheets. They must be ebonite. Could make nice accents/rings or whatevers. Not sure if they have them in rods or not. Post your interest in them, if you have any, and maybe we can divide uni-color rods, if available.
- staffwalker
- Site Supporter
- Posts: 391
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: USA, texas
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
To my eyes it looks like you might. I'd say:kbadkar wrote:Not sure, but I'd venture to guess:
red, blue, tan, solid black, brown, green, yellow.
I may have tan and yellow mixed up.
Red - Blue - Yellow - Solid Black - Brown - Green - Tan
But it's tough to tell. It doesn't matter anyway - I need some of each!
Okay - what diameters are available and at what price for ea dia? Is the price list from the earlier post still good?
∅ 20 mm € 24,- € 28,-
∅ 22 mm € 27,- € 31,-
∅ 24 mm € 29,- € 33,-
∅ 26 mm € 32,- € 36,-
????
∅ 20 mm € 24,- € 28,-
∅ 22 mm € 27,- € 31,-
∅ 24 mm € 29,- € 33,-
∅ 26 mm € 32,- € 36,-
????
Kim Kendall
http://www.PenguinBriar.com/
http://www.PenguinBriar.com/
Wow, that's about a million times better than the last batch!
The pattern is very nice on the flat sections now, but less interesting, even a bit mottled left round. Bet they'd make nice saddle bits, or anything that would feature flat sections, but I wonder if the round and transition sections may be disappointing... I'll be interested to see how the various stem shapes end up looking.
The pattern is very nice on the flat sections now, but less interesting, even a bit mottled left round. Bet they'd make nice saddle bits, or anything that would feature flat sections, but I wonder if the round and transition sections may be disappointing... I'll be interested to see how the various stem shapes end up looking.
Scott E. Thile
Collector, smoker, and aspiring pipemaker.
http://sethilepipes.com
Sysop: http://pipedia.org
---------------------
Collector, smoker, and aspiring pipemaker.
http://sethilepipes.com
Sysop: http://pipedia.org
---------------------
Is the black rod just black... or could it be a 2 toned black?
Kim Kendall
http://www.PenguinBriar.com/
http://www.PenguinBriar.com/
- Vermont Freehand
- Posts: 526
- Joined: Sat Mar 22, 2008 5:31 pm
- Location: Dorset, Vermont, USA
- Contact:
-
- Posts: 14
- Joined: Wed Dec 17, 2008 10:42 pm
- Location: buford , Ga
Yeah, I'll go halvsies. I was planning on going 1 full rod of each, but the economic realities of such an expenditure make it difficult to justify... in other words, I'm not sure how to explain it to the wife.Vermont Freehand wrote:anyone want to go halvsies on one each of the swirls?
I already have the order in with Kurt and we can arrange the split as the order develops. Kurt said he's willing to cut and ship separate, but doesn't want to deal with half orders.
Well we just got our black ebonite order, so there isn't much point - especially if the price per rod is what it is (50 euros). That's why I asked - I didn't think it was possible for plain black rod to be that price (unless it's the giant 50mm diameter rod)kbadkar wrote:I assumed it was just black, but I'll see if I can get a definitive answer to that.kkendall wrote:Is the black rod just black... or could it be a 2 toned black?
Kim Kendall
http://www.PenguinBriar.com/
http://www.PenguinBriar.com/
- Vermont Freehand
- Posts: 526
- Joined: Sat Mar 22, 2008 5:31 pm
- Location: Dorset, Vermont, USA
- Contact: