pipemakersforum.com

Posted: **Fri Jul 10, 2009 4:09 pm**

what is the most common depth/Length that the delrin should be going into the Shank (Mortise) and in to the Stem?

Posted: **Fri Jul 10, 2009 4:20 pm**

At least 3/8" into the stem and around 1/2" into the mortise.

TJ

Posted: **Fri Jul 10, 2009 5:25 pm**

On some pipes you might get away with 1/4" in the stem, like if you use a 1/4" tenon, but by and large I agree with Todd - especially about having at least 1/2" of depth in the shank.

pipemakersforum.com

Delrin Length

Delrin Length