Can anyone recommend a quick change tool post for a Jet 920 and where to get one. Jet does not make one for the 920 model.
If possible I would prefer a drop in ready to go model w/o having to mill any parts.
Thanks!
Jet 920 owners; recommend a quick change tool post
Re: Jet 920 owners; recommend a quick change tool post
That's the one that I have, and I know several other pipe makers use the same setup. If you get that, and you don't have a modified face plate for your tool post, you'll want to get the "4 Bolt Compound Hold Down" which is lower down the page. My 9x20 came with a lame two point hold down, and I needed something with more strength and stability. Also, if you buy T nuts from them, beware as they strip pretty easily. Just my 2 cents.
Re: Jet 920 owners; recommend a quick change tool post
Hi,
I found this article on the net http://www.phase2plus.com/images/MW_Jam ... rticle.pdf maybe it can be some help...
Best,
Steffen
I found this article on the net http://www.phase2plus.com/images/MW_Jam ... rticle.pdf maybe it can be some help...
Best,
Steffen
„If you can dream it, you can do it." (Walt Disney)