It is. There. I have allayed your wondering.KurtHuhn wrote:Honestly, when crap like this stirs up the board, I wonder if it's really worth my time, effort, and capital expense to maintain it....
Open Letter to New Pipe Makers
Re: Open Letter to New Pipe Makers
- Mike Messer
- Posts: 546
- Joined: Fri Mar 27, 2009 11:01 pm
- Location: USA
- Contact:
Re: Open Letter to New Pipe Makers
Sorry, Kurt, but to clarify, I was just working the other side of the idea a bit, for the sake of balance. There is another side, but I didn't propose a revolution or anything radical.KurtHuhn wrote:Holy crap!Mike Messer wrote:I think you and Kurt, as administrators and all of the "Big Boys" need to adjust your thinking a bit, about this idea.
I mean... Holy Crap!
For the record, I am perfectly happy to let anyone do what anyone wants to do. I hold nobody to any standard, aside from my personal ideas about decorum, and even that has gotten me in more trouble than I care to admit - with folks with whom I'd rather share a beer or a single malt (or any drink, really) and share funny stories, recountings of pain, or just have a fun night with while forgetting my cares and concerns for a moment.
Honestly, when crap like this stirs up the board, I wonder if it's really worth my time, effort, and capital expense to maintain it....
Pipemakersforum is a great site for pipemakers, and I am absolutely sure that you, me, and many others have benefited immensely from it.
Mike Messer
http://handmade-briar-usa.com
http://handmade-briar-usa.com
- Mike Messer
- Posts: 546
- Joined: Fri Mar 27, 2009 11:01 pm
- Location: USA
- Contact:
Re: Open Letter to New Pipe Makers
You didn't say anything foul. It just illustrated what I was saying, that some people may feel like they have to very careful about what they say. That's a bit overbearing, and I think they need to adjust their thinking a bit.billiard wrote:+1kola wrote:As a newb, I found Tylers comments very helpful and took no offense to it at all.
Kola
In the other thread I was just trying to ask politely, please let's not make a big deal about my comment, I ain't a wordsmith and meant no foul.
Tyler made some good points, too. I just think he went a bit too far, that's all, and so I said so. But, again, he made some very good points.
Last edited by Mike Messer on Mon Dec 06, 2010 10:09 am, edited 2 times in total.
Mike Messer
http://handmade-briar-usa.com
http://handmade-briar-usa.com
Re: Open Letter to New Pipe Makers
Tyler, great words to remember.
Re: Open Letter to New Pipe Makers
Greatest post on the forum!
Fantastic advice from Tyler, its all so true, we have all been there and we have all looked back thought "what an ass i was back then" lol. I personally was very lucky in that i had hand on tuition with a pipe maker and probably the most important thing he told me was to watch, listen and learn, then make pipes, lots of pipes!
When I made my first pipe i thought it was the greatest pipe in the world, and many friends told me the same. I was wrong, they were wrong. Heck it wasn't even the greatest "first" pipe in the world lol. The important thing however was it wasn't my last, i just kept chugging away at it, at first making a pipe every week or so, then when i was forced into full time pipemaking that became a pipe almost every day. The first few I kept or gave away, soon I began to sell them, luckily i had support in those early days and that money was ploughed back into pipe making, it bought briar and other materials, as well as tools. Very soon I had my own workshop and didnt need to rely on the workshop of others. Now just over 3 years down the line from that very first pipe I am a full time pipe maker. I have no illusions that I am the greatest pipe maker in the world, all i do is try and make the very best pipe I can make. I make enough money to pay my rent, put fuel in my car and buy the girlfriend the odd present here and there. I am not a wealthy man, nor do i ever expect to be but when I go to "work" every morning I am a truly happy man, and thats all the riches in the world to me.
Fantastic advice from Tyler, its all so true, we have all been there and we have all looked back thought "what an ass i was back then" lol. I personally was very lucky in that i had hand on tuition with a pipe maker and probably the most important thing he told me was to watch, listen and learn, then make pipes, lots of pipes!
When I made my first pipe i thought it was the greatest pipe in the world, and many friends told me the same. I was wrong, they were wrong. Heck it wasn't even the greatest "first" pipe in the world lol. The important thing however was it wasn't my last, i just kept chugging away at it, at first making a pipe every week or so, then when i was forced into full time pipemaking that became a pipe almost every day. The first few I kept or gave away, soon I began to sell them, luckily i had support in those early days and that money was ploughed back into pipe making, it bought briar and other materials, as well as tools. Very soon I had my own workshop and didnt need to rely on the workshop of others. Now just over 3 years down the line from that very first pipe I am a full time pipe maker. I have no illusions that I am the greatest pipe maker in the world, all i do is try and make the very best pipe I can make. I make enough money to pay my rent, put fuel in my car and buy the girlfriend the odd present here and there. I am not a wealthy man, nor do i ever expect to be but when I go to "work" every morning I am a truly happy man, and thats all the riches in the world to me.
Re: Open Letter to New Pipe Makers
Wow! Wish I (and no doubt many others) could say that!but when I go to "work" every morning I am a truly happy man
Need an apprentice or floorsweeper?
![Wink :wink:](./images/smilies/icon_wink.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Re: Open Letter to New Pipe Makers
Well said Tyler. I was away from here a while and then came back to see a lot of advice and suggestions from newly registered guys I had never heard of. I thought "who the hell is gonna take what this guy says seriously?" When someone puts pictures up in the gallery, everyone is certainly free to offer their opinion on whether or not they like the pipe, but c'mon guys, don't take advice on making pipes or buying machines & supplies from a guy who's been doing this for a few months.
It's perfectly reasonable to feel that we should be very careful about what we say. We don't just blabber on with folks we meet on the street do we? Why should this place be different? That's the biggest problem with the interweb - people think they can check their manners and courtesy at the door.Mike Messer wrote:<SNIP>It just illustrated what I was saying, that some people may feel like they have to very careful about what they say. That's a bit overbearing, and I think they need to adjust their thinking a bit.
"Cut your own wood and you warm yourself twice." - Henry Ford
Re: Open Letter to New Pipe Makers
Bravo Tyler! Well spoken. Don't post a lot these days, but I check in every day.
Dan
Gabrieli Pipes
Dan
Gabrieli Pipes
Re: Open Letter to New Pipe Makers
Chris you told me in a PM you WERE the greatest pipe maker of all time. What gives?
ALL YOUR PIPE ARE BELONG TO US!
Re: Open Letter to New Pipe Makers
Sasquatch wrote:Chris you told me in a PM you WERE the greatest pipe maker of all time. What gives?
Ssshh, you were meant to keep that a secret
![Wink ;)](./images/smilies/icon_wink.gif)
Re: Open Letter to New Pipe Makers
its all Bills fault!
jk
Kola
![Cursing and swearing :filth-n-foul:](./images/smilies/cursin.gif)
jk
![Cool 8)](./images/smilies/icon_cool.gif)
Kola
Re: Open Letter to New Pipe Makers
No worries there... I been married for 17 years now so I am pretty use to everything being my fault.kola wrote:its all Bills fault!![]()
jk![]()
Kola
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: Open Letter to New Pipe Makers
+1Nate wrote:Agreed.kola wrote:<Snip> As a newb, I found Tylers comments very helpful and took no offense to it at all.
Well said, Tyler. And please don't get discouraged Kurt. Your work here is greatly appreciated by many more than just myself.
Re: Open Letter to New Pipe Makers
Thanks for such wonderful advice.
Greetings.
Felix
Greetings.
Felix
El mundo de la pipa
http://pipasmasso.blogspot.com.es/
http://pipasmasso.blogspot.com.es/
-
- Posts: 71
- Joined: Sun Oct 24, 2010 5:44 pm
Re: Open Letter to New Pipe Makers
This is so true, and as a new member myself, it is sometimes rough at first to get used to some of the joking on the forum, i.e. figuring out when general banter is occurring and when to take offense. After a while you realize that everyone is generally trying to help, but it is definitely a trial by fire. I know that this is a community and people have their own personalities, but if genuine questions are put up, no matter how ignorant of pipemaking, it seems like there shouldn't ever have to be a "Serious answers only" caveat.FredS wrote:That's the biggest problem with the interweb - people think they can check their manners and courtesy at the door.
Re: Open Letter to New Pipe Makers
I am, as usual, exceedingly late to this but it's been a busy December-January. FWIW, my thoughts:
Tyler has a better memory than I do regarding the forum history. No, we didn't overlap, though it was a near miss. IIRC, I started my pipemaking instruction site in 1997 and carried it through till around 2001-2002, just before we moved to France. There was no friction at all regarding Tyler setting his site up... In fact, I recall giving him my very best and most sinister, "Heh heh heh, good luck with that..."
I was happy to see the pipemaking hobby thing carry on and VERY happy to see it getting off of my back and onto someone else's (Nothing personal against Tyler here. Any innocent victim would do.)
Everything Tyler said in his post is 100% accurate, IMO. He didn't overstate, overthink, or overstep. That was the kind of post that needs to be graven in stone in letters 50' high and placed as a barrier at the gates of the forum that no member is allowed to pass until they can recite it word for word from memory. My own experience echoes his - A guy with a good eye and a good head for design and the patience to make a good pipe can usually make a good pipe, from whatever tools he has available. Over-obsession with tools and tool techniques is a waste of energy. If someone doesn't have "it", a $1200 lathe isn't going to make the difference. I did my initial pipe shaping by gluing sandpaper discs to the sides of a bench grinder's wheels, because it was what I had. The things that will make someone good at this are all to do with drive and determination and creativity, not with gadgets.
Amateur pipemakers can be OBNOXIOUS, sometimes overbearingly so. Tyler was correct in his comments about me being disillusioned with hobbyist pipemakers, but he was put it much more mildly than it was. I was absolutely sick of hearing from hobbyists, never wanted to hear another word from them, never wanted to see one single more email asking what speed to drill their bowl chambers at, etc etc. I was quite enthused at the start, and glad to help people, and unfortunately the usual thing happened, which was that people - sensing willingness - abused my tolerance and did the "mile for an inch" thing. IIRC, the breaking point for me was when a guy who had been emailing me multiple times a day for help... never once considering that he was wasting my working time... wrote me an irate email one morning because I had not responded to one of his drilling questions quickly enough, while I was busy trying to make a living so I could afford groceries. That was it for me.
The crucial thing to remember is that when a pro gives technical advice, it is WORKING TIME that DOES NOT PAY. Everybody that has a job knows what it's like when someone corners you at a party or something and starts asking questions related to your work - The old, "Hey, since you're a lawyer, I have this situation I'd like two hours of free advice on..." It's no fun. We're off duty. I don't mind answering simple questions because I'm glad to help out, but the problem is that when you answer a couple of questions cheerfully, too often you get a reply that's twice as long and filled with even more technical questions, and it escalates exponentially from there. If you've ever written someone three times in one day asking for pipemaking help, you've crossed the border from "Glad to" to "Damn, this guy is rude". If I'm being expected to sit and type out detailed replies and instructions for an hour, that'll be $50 and that's less than the service department charges for auto labor. Guys just don't think, or realize this, and too often get that, "Oh boy, he's answering my questions, now I can write up fifty MORE!" thing going.
This forum is a marvelous way around that, because the answers are already here. It also gives me a handy place to point people when they come to me with their question lists, because it heads them off early, lets me get back to the workshop, and makes them do their own answer hunting. Nothing is more obnoxious than the guy who won't search the forum for his answer, but instead demands that you save his searching time by spelling it out for him in perfect detail. If he doesn't have the time to try and figure it out for himself, why does he think I have the time to answer his questions?
Finally, there are the "I'm so radical the old guard can't handle me!" guys. The ones who say no, you're totally wrong to drill that with a lathe, you should be using this insane Rube Goldberg contraption they've custom built for the purpose which uses microprecision milled drive pulleys and cuts the bowl chamber with a revolving laser. Yeah. The old guard isn't being stuffy or close-minded when they shrug, roll their eyes, and say, "Whatever", they're simply expressing that they've seen this same revolutionary guy thirty times already and they know where this dialog is going if it carries on. Too many times I have wasted my good working time writing someone to explain how I do this or that, only to have amateur guy write back with, "No, that's totally wrong, you should be doing it THIS completely insane way because it gives .00000034% greater accuracy in the whatever whatever whatever."
The thing is, those stuffy old guard guys aren't trying to shut you down because your RADICAL XTREME new idea is too XTREME for them, it's because they can usually perceive at a glance whether something is actually an improvement or just a crazily extra-complicated way of doing something. Believe me, we professionals steal all the time when we see something good worth stealing. Solid ideas get traded back and forth, and if we spot a neat trick that's cool and has good economics, we're snapping it up in a second. There's no secret old boy aversion to newer and better tricks, at least on my part. To put it even more bluntly, if you feel like the old guard are being hostile to you, it's more likely that you're rude and your ideas are stupid than it is that they, en masse, have leagued against your radical brilliance.
So, there are my thoughts on the subject. I hope I wasn't too subtle.
These days, thirteen years into a professional career, I'm still happy to answer a question here and there, and help out anyone who's getting started... but I can't afford to spend two hours of working time every day writing replies to guys who want me to teach THEM, for FREE, how to compete with me for my dinner. Nuh uh. The problem is that each and every guy writing thinks they're the ONLY guy writing, and in reality they are one of ten so far that week. So if you sometimes get frustrated or feel you're being held at bay, don't immediately assume that the big bad evil pipemaker is deliberately trying to leave you in the cold or ignore your amazing skills - It's far more likely that he just doesn't have the time. Don't blame him, Go to your workshop and try making some more pipes. Learn things on your own rather than asking someone if a chamber should be drilled at 800rpm or 950 rpm. You'll retain the knowledge much better when you acquire it by screwing something up on your own than having it spoon fed to you anyway.
Here endeth the slavering diatribe [/rant]
![angry :soapbox:](./images/smilies/soapbox.gif)
Tyler has a better memory than I do regarding the forum history. No, we didn't overlap, though it was a near miss. IIRC, I started my pipemaking instruction site in 1997 and carried it through till around 2001-2002, just before we moved to France. There was no friction at all regarding Tyler setting his site up... In fact, I recall giving him my very best and most sinister, "Heh heh heh, good luck with that..."
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
Everything Tyler said in his post is 100% accurate, IMO. He didn't overstate, overthink, or overstep. That was the kind of post that needs to be graven in stone in letters 50' high and placed as a barrier at the gates of the forum that no member is allowed to pass until they can recite it word for word from memory. My own experience echoes his - A guy with a good eye and a good head for design and the patience to make a good pipe can usually make a good pipe, from whatever tools he has available. Over-obsession with tools and tool techniques is a waste of energy. If someone doesn't have "it", a $1200 lathe isn't going to make the difference. I did my initial pipe shaping by gluing sandpaper discs to the sides of a bench grinder's wheels, because it was what I had. The things that will make someone good at this are all to do with drive and determination and creativity, not with gadgets.
Amateur pipemakers can be OBNOXIOUS, sometimes overbearingly so. Tyler was correct in his comments about me being disillusioned with hobbyist pipemakers, but he was put it much more mildly than it was. I was absolutely sick of hearing from hobbyists, never wanted to hear another word from them, never wanted to see one single more email asking what speed to drill their bowl chambers at, etc etc. I was quite enthused at the start, and glad to help people, and unfortunately the usual thing happened, which was that people - sensing willingness - abused my tolerance and did the "mile for an inch" thing. IIRC, the breaking point for me was when a guy who had been emailing me multiple times a day for help... never once considering that he was wasting my working time... wrote me an irate email one morning because I had not responded to one of his drilling questions quickly enough, while I was busy trying to make a living so I could afford groceries. That was it for me.
The crucial thing to remember is that when a pro gives technical advice, it is WORKING TIME that DOES NOT PAY. Everybody that has a job knows what it's like when someone corners you at a party or something and starts asking questions related to your work - The old, "Hey, since you're a lawyer, I have this situation I'd like two hours of free advice on..." It's no fun. We're off duty. I don't mind answering simple questions because I'm glad to help out, but the problem is that when you answer a couple of questions cheerfully, too often you get a reply that's twice as long and filled with even more technical questions, and it escalates exponentially from there. If you've ever written someone three times in one day asking for pipemaking help, you've crossed the border from "Glad to" to "Damn, this guy is rude". If I'm being expected to sit and type out detailed replies and instructions for an hour, that'll be $50 and that's less than the service department charges for auto labor. Guys just don't think, or realize this, and too often get that, "Oh boy, he's answering my questions, now I can write up fifty MORE!" thing going.
This forum is a marvelous way around that, because the answers are already here. It also gives me a handy place to point people when they come to me with their question lists, because it heads them off early, lets me get back to the workshop, and makes them do their own answer hunting. Nothing is more obnoxious than the guy who won't search the forum for his answer, but instead demands that you save his searching time by spelling it out for him in perfect detail. If he doesn't have the time to try and figure it out for himself, why does he think I have the time to answer his questions?
Finally, there are the "I'm so radical the old guard can't handle me!" guys. The ones who say no, you're totally wrong to drill that with a lathe, you should be using this insane Rube Goldberg contraption they've custom built for the purpose which uses microprecision milled drive pulleys and cuts the bowl chamber with a revolving laser. Yeah. The old guard isn't being stuffy or close-minded when they shrug, roll their eyes, and say, "Whatever", they're simply expressing that they've seen this same revolutionary guy thirty times already and they know where this dialog is going if it carries on. Too many times I have wasted my good working time writing someone to explain how I do this or that, only to have amateur guy write back with, "No, that's totally wrong, you should be doing it THIS completely insane way because it gives .00000034% greater accuracy in the whatever whatever whatever."
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
So, there are my thoughts on the subject. I hope I wasn't too subtle.
![Image](http://s250.photobucket.com/albums/gg273/trever-t/mischief.gif)
Here endeth the slavering diatribe [/rant]
![angry :soapbox:](./images/smilies/soapbox.gif)
Happy Smoking,
Trever Talbert
www.talbertpipes.com
My Pipe Blog:
https://talbertpipes.com/category/pipeblog/
My Lizards & Pipes Web Comic:
https://talbertpipes.com/category/lizards/
Trever Talbert
www.talbertpipes.com
My Pipe Blog:
https://talbertpipes.com/category/pipeblog/
My Lizards & Pipes Web Comic:
https://talbertpipes.com/category/lizards/
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Re: Open Letter to New Pipe Makers
I love you Trever. ![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: Open Letter to New Pipe Makers
WOW! That was an expensive post, Trever!
LOL
LOL
Kim Kendall
http://www.PenguinBriar.com/
http://www.PenguinBriar.com/
Re: Open Letter to New Pipe Makers
KurtHuhn wrote:I love you Trever.
You're just saying that cause I look totally hot in fishnets.
Happy Smoking,
Trever Talbert
www.talbertpipes.com
My Pipe Blog:
https://talbertpipes.com/category/pipeblog/
My Lizards & Pipes Web Comic:
https://talbertpipes.com/category/lizards/
Trever Talbert
www.talbertpipes.com
My Pipe Blog:
https://talbertpipes.com/category/pipeblog/
My Lizards & Pipes Web Comic:
https://talbertpipes.com/category/lizards/
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Re: Open Letter to New Pipe Makers
When you are as HOT as you, fishnets are totally optional.TreverT wrote:KurtHuhn wrote:I love you Trever.
You're just saying that cause I look totally hot in fishnets.