Rad Davis pipe making techniques revealed!
- SimeonTurner
- Site Supporter
- Posts: 750
- Joined: Wed Dec 24, 2008 7:46 pm
- Location: Denver, Colorado
- Contact:
Rad Davis pipe making techniques revealed!
At great risk to life and limb, and recognizing that this will surely lead to an influx of thousands of new super highend pipes in the marketplace that may drive all current makers out of business, I have acquired raw video footage of Rad's pipe making technique. The world has a right to know.
http://www.youtube.com/watch?v=kGUtBBe2 ... re=related
This video is from a couple of years ago...Rad's aged a bit since then.
http://www.youtube.com/watch?v=kGUtBBe2 ... re=related
This video is from a couple of years ago...Rad's aged a bit since then.
"It is noble to be good; it is still nobler to teach others to be good - and less trouble."
Turner Pipes Website:
http://www.turnerpipes.com
Of Briar and Ashes:
http://turnerpipes.wordpress.com
Turner Pipes Website:
http://www.turnerpipes.com
Of Briar and Ashes:
http://turnerpipes.wordpress.com
- Joe Hinkle Pipes
- Posts: 804
- Joined: Tue Feb 15, 2011 1:39 am
- Location: Lafayette Indiana
- Contact:
Re: Rad Davis pipe making techniques revealed!
Damn! Why didnt I think of that! i wasted so much money on A lathe and chucks. Just a 1x6x8' and some wood glue.... im an idiot. how does it smoke Rad?
Re: Rad Davis pipe making techniques revealed!
I think bruzer4821 says it all;
@rangu66 sure you can go out and buy one, but then you would be just like every other fucker on this planet, when you build it yourself it means more, plus you can customize it however you want, and this cost me about 5 bucks. you ever even smoked weed?
Its like he's some kind of poet or something...
@rangu66 sure you can go out and buy one, but then you would be just like every other fucker on this planet, when you build it yourself it means more, plus you can customize it however you want, and this cost me about 5 bucks. you ever even smoked weed?
Its like he's some kind of poet or something...
Ryan Alden
http://www.aldenpipes.com
http://www.aldenpipes.com
Re: Rad Davis pipe making techniques revealed!
That is awesome. I wonder if it passes the pipe cleaner test... And here I am trying to figure out how to make my smoke hole hit the chamber at just the right angle, and how to drill my mortise for my tenon. Who needs all that nonsense? I didn't realize I could cut my pipes in half and drill it that way. I was wondering how all you guys were drilling curvy holes.
Major mind opener here. Thanks for sharing.
Major mind opener here. Thanks for sharing.
Re: Rad Davis pipe making techniques revealed!
There actually is some precedent for this.
The Inuit (Eskimo) made stems by splitting a branch, hollowing the core and then wrapping it back up with willow bark or seal skin or something. I recall reading it in Alfred Dunhills Pipe Book.
The Inuit (Eskimo) made stems by splitting a branch, hollowing the core and then wrapping it back up with willow bark or seal skin or something. I recall reading it in Alfred Dunhills Pipe Book.
Ryan Alden
http://www.aldenpipes.com
http://www.aldenpipes.com
Re: Rad Davis pipe making techniques revealed!
I know Kurt posted a very nice instructional video of how to drill and shape on a lathe but this just beats everything else. Fast and straight forward with a remarkable result!!
Re: Rad Davis pipe making techniques revealed!
Dear Simeon,
Thank you so much for posting the link to my video. While I confess that my pipe making skills were in their infancy at the time of filming, I still use the *exact* same techniques to make my pipes today. To this day, I consider the glue job on the "really nice one" (see my explanation beginning at about 2:40) to be the pinnacle of my pipe making career. I really did put a LOT more work into that one. It's all in the vise baby.
Thank you so much for posting the link to my video. While I confess that my pipe making skills were in their infancy at the time of filming, I still use the *exact* same techniques to make my pipes today. To this day, I consider the glue job on the "really nice one" (see my explanation beginning at about 2:40) to be the pinnacle of my pipe making career. I really did put a LOT more work into that one. It's all in the vise baby.
Re: Rad Davis pipe making techniques revealed!
Oak 1X4's $4.32Edward wrote:I think bruzer4821 says it all;
@rangu66 sure you can go out and buy one, but then you would be just like every other fucker on this planet, when you build it yourself it means more, plus you can customize it however you want, and this cost me about 5 bucks. you ever even smoked weed?
Its like he's some kind of poet or something...
Electricity $.60
Shel..., uh... Sul..., Ssss...?
Top coating that's shiney $.08
Not being "just like every other f*@ker on this planet" - Priceless.
Re: Rad Davis pipe making techniques revealed!
Well, this video confirms I've been doing everything right from the get go.
Go hang a salami I'm a lasagna hog.
- KurtHuhn
- Site Admin
- Posts: 5326
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: United States/Rhode Island
Re: Rad Davis pipe making techniques revealed!
You see what he did here? He admitted that his first pipe made from a 2x4 was a piece of shit, and instead opted for oak. Kurt wins again, bitches.
Smoke the oak, taste the cat piss.
Smoke the oak, taste the cat piss.
-
- Posts: 121
- Joined: Fri Apr 15, 2011 12:00 pm
- Location: Decatur, IL
Re: Rad Davis pipe making techniques revealed!
This is classic.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: Rad Davis pipe making techniques revealed!
Why have you guys been overcomplicating things for us newer guys with your fancy tools and exotic materials!? I love the flat bottom in the bowl!