Pipe #2 Progress Pics *Update #3*

For the things that don't fit neatly into the other categories.
Post Reply
bbeberle
Posts: 83
Joined: Tue Oct 09, 2012 10:46 pm
Location: Midland, Texas

Pipe #2 Progress Pics *Update #3*

Post by bbeberle »

Hey everyone, since I think everyone enjoy the first progress thread I figured I would do another for this second pipe.

I got some great advice from Rad, Tyler and numerous other people and am looking forward to applying that advice and seeing how much I can improve on the mistakes I made on the first one. So again, this will be another poker and hopefully I can get this the way it needs to be! And thanks to Tyler for getting me set up!

Here we go....

Wooo I finally posted a picture correctly!


-----------------------------------------------------------------------------------
Update #2 I have about 2 hours worth of work here so far. Obviously I have a lot to work on but if you see anything, please let me know! Be honest! I can't get better if no one tells me about my mistakes! Thanks yall :) And no the shank is NOT cock-eyed this time. I just forgot to put it back in before pics











--------------------------------------------------------------------------------------------------------------

Update #3 I think I got the shank/stummel transition like 95% done, very close...not quite yet but very close. The shank also seems a tiny bit thicker towards the stem (which is not finished yet), so I will need to take care of that. Now the bowl....it looks slighty curved on one of the pictures but I think it's the picture because it looks damn near perfect on my end. What are y'alls opinions?















Last edited by bbeberle on Sat Oct 27, 2012 1:42 am, edited 6 times in total.
the rev
Posts: 737
Joined: Wed Oct 01, 2008 1:42 pm
Location: long beach CA
Contact:

Re: Pipe #2 Progress Pics

Post by the rev »

I really like the minimalist design. Not sure its a poker, but it is beautiful. I think it might look better with a bit of stain on it however.

:)

rev
"but rev, isn't smoking a sin?"

well I suppose if one were to smoke to excess it would be a sin

"but what would be smoking to excess?"

Why smoking two pipes at once of course
The Smoking Yeti
Posts: 1346
Joined: Tue Jan 10, 2012 4:55 pm
Contact:

Re: Pipe #2 Progress Pics

Post by The Smoking Yeti »

It looks too stretched out to be poker- how bout a billiard?
My pipemaking stream of conscience/ website:

http://yetipipe.tumblr.com/
the rev
Posts: 737
Joined: Wed Oct 01, 2008 1:42 pm
Location: long beach CA
Contact:

Re: Pipe #2 Progress Pics

Post by the rev »

yup, a nice paneled billiard with a freehand top

rev
"but rev, isn't smoking a sin?"

well I suppose if one were to smoke to excess it would be a sin

"but what would be smoking to excess?"

Why smoking two pipes at once of course
bbeberle
Posts: 83
Joined: Tue Oct 09, 2012 10:46 pm
Location: Midland, Texas

Re: Pipe #2 Progress Pics

Post by bbeberle »

lol
bbeberle
Posts: 83
Joined: Tue Oct 09, 2012 10:46 pm
Location: Midland, Texas

Re: Pipe #2 Progress Pics *Update #2*

Post by bbeberle »

New Update y'all
the rev
Posts: 737
Joined: Wed Oct 01, 2008 1:42 pm
Location: long beach CA
Contact:

Re: Pipe #2 Progress Pics *Update #2*

Post by the rev »

ok mister, you fiddled with your first post and now all of our funny looks stupid. What you should do is post your second update after our hilarity, other than that the post was very good

rev
"but rev, isn't smoking a sin?"

well I suppose if one were to smoke to excess it would be a sin

"but what would be smoking to excess?"

Why smoking two pipes at once of course
bbeberle
Posts: 83
Joined: Tue Oct 09, 2012 10:46 pm
Location: Midland, Texas

Re: Pipe #2 Progress Pics *Update #2*

Post by bbeberle »

the rev wrote:ok mister, you fiddled with your first post and now all of our funny looks stupid. What you should do is post your second update after our hilarity, other than that the post was very good

rev
I'm sorry I ruined all y'alls fun! I am second Tyler, here to poop on the party!
bbeberle
Posts: 83
Joined: Tue Oct 09, 2012 10:46 pm
Location: Midland, Texas

Re: Pipe #2 Progress Pics *Update #3*

Post by bbeberle »

Third updated is up y'all Im about 3-4 hours in
wdteipen
Posts: 2817
Joined: Sat Mar 29, 2008 1:05 pm

Re: Pipe #2 Progress Pics *Update #3*

Post by wdteipen »

Looking good so far number two.
Wayne Teipen
Teipen Handmade Briar Pipes
http://www.teipenpipes.com
scotties22
Posts: 1767
Joined: Mon Jun 11, 2012 9:43 pm
Location: Missouri
Contact:

Re: Pipe #2 Progress Pics *Update #2*

Post by scotties22 »

bbeberle wrote:
the rev wrote:ok mister, you fiddled with your first post and now all of our funny looks stupid. What you should do is post your second update after our hilarity, other than that the post was very good

rev
I'm sorry I ruined all y'alls fun! I am second Tyler, here to poop on the party!

That's why we call you #2 :lol:
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
User avatar
d.huber
Posts: 2691
Joined: Mon Dec 12, 2011 9:28 pm
Location: Durham, NC
Contact:

Re: Pipe #2 Progress Pics

Post by d.huber »

the rev wrote:I really like the minimalist design. Not sure its a poker, but it is beautiful. I think it might look better with a bit of stain on it however.

:)

rev
How about a cavalier with a severe forward cant? :lol:

I'd call that one a stacked poker. It's lookin' good! Nice block, too.
http://www.dshpipes.com

"Strive for excellence, not for what someone else accepts."
-Tyler Beard
bbeberle
Posts: 83
Joined: Tue Oct 09, 2012 10:46 pm
Location: Midland, Texas

Re: Pipe #2 Progress Pics

Post by bbeberle »

UberHuberMan wrote:
the rev wrote:I really like the minimalist design. Not sure its a poker, but it is beautiful. I think it might look better with a bit of stain on it however.

:)

rev
How about a cavalier with a severe forward cant? :lol:

I'd call that one a stacked poker. It's lookin' good! Nice block, too.
Thank you sir. I tried my hand at my first hand cut stem and i failed big time lol. I got one last shot and if that fails too then this one will just have to sit for a while until I can figure something out.
Post Reply