Page 1 of 1
Freehand Experiment
Posted: Sun May 12, 2013 12:23 am
by Literaryworkshop
It all started with this ebuchon block:
The more I looked at it, the more nice figure I saw. It was relatively thick, too, much thicker than necessary for the pipes I've felt like making recently. So I decided to work against the grain a little bit.
Turn the block on its side...
And voila! It's a plateaux block. Kind of...
Drilling it was interesting, but I got it done eventually. Here's the result:
My wife says it looks like a coffee cream pitcher. Oh well...
Re: Freehand Experiment
Posted: Sun May 12, 2013 6:41 am
by Jthompson1995
Nice pipe, I think you made a good decision to turn the block so you could get the straight grain all around.
A few items I notice is that the shank seems heavy compared to the rest of the pipe and the stem is at a different angle than the shank. It makes for sort of a visual kink at the stem/shank junction. I also would like to see the stummel stained to bring out the grain even more.
I'm still very new at this so I could be totally off base as well. Very nice pipe.
Re: Freehand Experiment
Posted: Sun May 12, 2013 4:14 pm
by Literaryworkshop
I mostly agree, and thanks for the comments. They help a lot. I need to get better about drilling so that the stummel and the stem flow together in one line. I think that drilling the mortise at a different angle from the air hole would help a lot. I'm going to keep working on this.
Re: Freehand Experiment
Posted: Fri May 24, 2013 10:32 pm
by Rodneywt1180b
I haven't spent as much time in the gallery as maybe I should. Checking out other people's pipes and reading the comments is helping me to learn what a good pipe looks like. Thank you for posting your work here.
I like the shape of the pipe and the way you turned the block to find the best grain. I didn't notice the difference in direction on the stem and shank until it was pointed out in the comments. It's not large, but it's there. Also it looks like a flat bottom in the chamber. Is it flat? If so, how does it work compared to a rounder bottom?
Thanks,
Rodney
Re: Freehand Experiment
Posted: Sat May 25, 2013 9:41 pm
by Literaryworkshop
Nope, the bottom of the chamber is rounded. It's really hard to get that to show up on a camera.
One of these days I may make a different version of this pipe that has a more consistent shape at the bottom, but I'm still got so many forms and shapes to experiment with.