Page 1 of 1
Blowfish with Bamboo Shank
Posted: Fri Jan 17, 2014 1:47 pm
by jogilli
I haven't posted in a while.. besides working on basic improvement I bought some real lights for taking pictures...so fellas .. and lady... critique is welcome .. oh yea.. this is my last pipe for 2013
Oh BTW I hate the stupid fuzz.. what do you folks do to get rid of it?
L 5 1/2
W 1 5/8
H 2 3/8
Bowl Depth 1 1/2
Chamber 3/4
Bit width 16.8mm .. sorry
Bit width 3.7mm
Re: Blowfish with Bamboo Shank
Posted: Fri Jan 17, 2014 2:20 pm
by d.huber
Nicely done, James!
Man, you really did an excellent job of keeping your sandpaper off of your bamboo. I'm still struggling with that.
Re: Blowfish with Bamboo Shank
Posted: Fri Jan 17, 2014 3:35 pm
by Ocyd
The stummel and stem look so shiny the bamboo seems a little out of place. How did you get it so shiny? It's like polished stone.
Re: Blowfish with Bamboo Shank
Posted: Fri Jan 17, 2014 3:50 pm
by jogilli
David
It just takes time and practice... That bamboo is sturdier than the thinner bamboo in the outer skin..when I first started working with bamboo I used painters tape ... Now I just sand around it with higher grits
Ocyd
Just a lot of polishing and building up a shine on... One of the final buffs I do is with a special yellow paste sold over in Europe for high glass buffing after the final 600'grit sanding... And top,it off with carnauba wax
Same for the stem... Multiple high glass buffs after sanding... 520 grit, and a high glass yellow paste... The bamboo is shiny also it just doesn't show up as much due to lighting I guess
James