PITH 2016!!!!!!

kamkiel · Post by **kamkiel** » Tue May 10, 2016 9:55 pm

I'm still in. Just need to finish up some non-pipe stuff that has bogged me down last April, then I'm going to start.

mightysmurf8201 · Post by **mightysmurf8201** » Tue May 10, 2016 10:25 pm

Rodneywt1180b wrote:we just had some unexpected expenses come up. Doesn't look like the budget is going to allow much in the way of playing for a while. I'm sorry to say I'm going to have to drop out this year. Although it doesn't amount to much, the money is better spent elsewhere right now.
Rodney

Sorry to hear it man. If there's anyway I can be of help, don't be afraid to reach out.

mightysmurf8201 · Post by **mightysmurf8201** » Tue May 10, 2016 10:32 pm

Just as a reminder, we're looking at a deadline of July 31. I know it's still 2 months away, but time has a way of creeping up on us. I got a test pipe done a few weeks ago and I'm pretty happy with how it came out. I have to make another one now because Chicago has a way of turning pipes into cash

seamonster · Post by **seamonster** » Tue May 10, 2016 11:55 pm

I'm on it. have made a several trials, and have my submission pipe shaped and waiting to be drilled.... the lovely summer like weather in Portland is keeping me out of the shop on weekends..... but will have no problem getting it done.

sent from my blah-dee-blah, using hooty-hoo

Oakbear · Post by **Oakbear** » Wed May 11, 2016 5:06 am

I've made enough mistakes i reckon i'll have something by July.

Smokeable mistakes though, so a nice excuse for some experimentation and shop pipes.

I actually had one i thought would be my submission almost shaped, then a sand pit turned into a chasm....

Jthompson1995 · Post by **Jthompson1995** » Wed May 11, 2016 12:33 pm

I've got my stummel drilled and rough shaped. Need to fit the stem next. No problem by the deadline.

calsbeek · Post by **calsbeek** » Thu May 19, 2016 2:09 pm

How do folks usually exchange addresses?
I need to hook up with Oakbear and Ocelot if I'm not mistaken.

seamonster · Post by **seamonster** » Thu May 19, 2016 5:47 pm

calsbeek wrote:How do folks usually exchange addresses?
I need to hook up with Oakbear and Ocelot if I'm not mistaken.

After the deadline, there will be the OFFICIAL shuffled version of the list. This will be for passing pipes along.
As of know, the list is just the order people shouted "I'm in!".
At this point, the order is totally unofficial.

But to answer your question, typically folks get in touch with each other using the PM (private message) function.

cheers,
Jeremy.

calsbeek · Post by **calsbeek** » Thu May 19, 2016 7:57 pm

ah ok. Good to know.

So don't send anything out until the deadline passes?

seamonster · Post by **seamonster** » Fri May 20, 2016 12:31 am

calsbeek wrote:ah ok. Good to know.

So don't send anything out until the deadline passes?

As we get closer to the deadline, hopefully we'll start to see pictures posted here., Mightysmurf will make a big announcement with who to send to and ways to go about it.

It might be helpful for you to read through the PITH threads from the last few years, you can better see how it went.

sent from my blah-dee-blah, using hooty-hoo

mightysmurf8201 · Post by **mightysmurf8201** » Mon May 23, 2016 12:09 pm

Yup, once the deadline hits, I'll generate a randomized list of participants, and that's how you'll find out who you receive from and you you'll send to.

eric · Post by **eric** » Fri May 27, 2016 4:00 pm

Let's call it done.

calsbeek · Post by **calsbeek** » Sun May 29, 2016 9:07 am

shot gun shell cap. Genius
your idea?

eric · Post by **eric** » Sun May 29, 2016 9:42 pm

calsbeek wrote:shot gun shell cap. Genius
your idea?

I thought of it, but a quick search showed I wasn't the first.

If you try it, I recommend a heat gun and pliers to separate the plastic shell case from the metal head, instead of all the other ways I tried that take forever and barely work.

Jthompson1995 · Post by **Jthompson1995** » Sun Jun 26, 2016 3:21 pm

Finished this up today since I'll have next to no time for pipemaking in the next 3 weeks. It's afairly small pipe but would be great for flakes and, with the army mount, will be a great pocket pipe that you can break down if needed.

4 5/8 long, 21 grams, 11/16 dia chamber. Shank cap is stabilized wormy maple.

mightysmurf8201 · Post by **mightysmurf8201** » Tue Jun 28, 2016 9:44 am

We have 1 month left! I'm gonna hunker down this week and get mine done. How's everyone else doing? If this is your first attempt, I recommend not waiting to the last minute, just in case you run into some issues. If anyone needs help feel free to reach out.

calsbeek · Post by **calsbeek** » Tue Jul 05, 2016 6:51 am

I've ruined three blocks so far!

kamkiel · Post by **kamkiel** » Tue Jul 05, 2016 7:26 pm

I've finished. I leave China on the 14th and the pipe will come with me.

seamonster · Post by **seamonster** » Wed Jul 06, 2016 12:56 pm

Besides a final polish, and a bag, this little one is done. I'm heading to Europe tomorrow, but will be back in Portland on the 29th. I'm really excited to see some pipes!

sent from my blah-dee-blah, using hooty-hoo

calsbeek · Post by **calsbeek** » Wed Jul 20, 2016 10:01 am

pipemakersforum.com

PITH 2016!!!!!!

Pipe shape

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!

Re: PITH 2016!!!!!!