Teaser of things to come...

We all make stuff other than pipes, so here's a place where "anything goes" as far as showing off some of your projects and other hobbies.
Post Reply
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Teaser of things to come...

Post by KurtHuhn »

I've taken on a pretty cool commission, and the below is just the first practice run:
Image

What is it, a ball? No, turn it over...

Image

This was spun on my wood lathe from some sheet copper. Turned out pretty well. I've never spun anything that small before....
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
User avatar
taharris
Posts: 675
Joined: Tue Dec 07, 2010 6:42 am
Location: Ohio
Contact:

Re: Teaser of things to come...

Post by taharris »

OK, I'll bite.

What are you making?

And how do you spin copper on a wood lathe?
I am intrigued. 8)
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Re: Teaser of things to come...

Post by KurtHuhn »

Metal spinning is really easy and fun - as long as you keep your wits about you and have done your research. Look at some videos on Youtube and you'll see pretty much everything you need to understand the basic process. From there it's just a matter of attention to detail. The funny part about this is that the bigger the final piece, the easier it is to do. When you're trying to make very small pieces, things get much more difficult.

And I'm not letting the cat out of the bag... yet. :)
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
caskwith
Posts: 2200
Joined: Sat Dec 08, 2007 6:00 am

Re: Teaser of things to come...

Post by caskwith »

Probably knifey related. Is it a barrel knife? Or a pipe-hawk?
User avatar
RadDavis
Posts: 2693
Joined: Thu Nov 23, 2006 8:00 pm
Location: united states/Alabama
Contact:

Re: Teaser of things to come...

Post by RadDavis »

Cookware for a miniaturist? :lol:

Rad
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Re: Teaser of things to come...

Post by KurtHuhn »

I'll bet the potential market is tiny though. :mrgreen:
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
User avatar
RadDavis
Posts: 2693
Joined: Thu Nov 23, 2006 8:00 pm
Location: united states/Alabama
Contact:

Re: Teaser of things to come...

Post by RadDavis »

KurtHuhn wrote:I'll bet the potential market is tiny though. :mrgreen:
Larger than you might think. :wink:

Rad
Pooka
Posts: 29
Joined: Tue Nov 03, 2009 1:55 am

Re: Teaser of things to come...

Post by Pooka »

A quick google on the craft revealed much potential fun and use for this stuff. Can't wait to see what you're planning.

I'm going to figure out some things to fiddle around with now...
User avatar
Philthy
Posts: 73
Joined: Fri Feb 05, 2010 8:16 pm
Location: Maryland
Contact:

Re: Teaser of things to come...

Post by Philthy »

I know, I know- Got it in one! :thumbsup:

But I aint tellin'............
User avatar
hendu3270
Posts: 30
Joined: Tue Aug 11, 2009 11:02 am

Re: Teaser of things to come...

Post by hendu3270 »

Soooooooo, what was it for????
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Re: Teaser of things to come...

Post by KurtHuhn »

Ooops, I completely forgot to update this thread!

Here's the final product:
Image
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
User avatar
Alan L
Site Supporter
Posts: 290
Joined: Fri Feb 08, 2008 11:17 am
Location: Johnson City, TN, USA

Re: Teaser of things to come...

Post by Alan L »

Exactly what I suspected you were up to, and it came out great! :thumbsup:
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Re: Teaser of things to come...

Post by KurtHuhn »

Thanks Alan!

And this, I promise, won't take three years and a two pounds of 5100 to break in. :wink:

http://www.pipecrafter.com/pipes/cityma ... apple1.php
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
User avatar
ND Pipes
Posts: 812
Joined: Fri Jul 16, 2010 7:21 am
Contact:

Re: Teaser of things to come...

Post by ND Pipes »

WOW!!!... this is nice... double WOW for sure.... :)
"URTEILE NICHT ÜBER DINGE, VON DENEN DU NUR ECHO UND SCHATTEN KENNST !"

http://tnd-pipes.com/
User avatar
archaggelosmichail
Posts: 188
Joined: Thu Jul 14, 2011 11:11 am
Location: Paros, Greece
Contact:

Re: Teaser of things to come...

Post by archaggelosmichail »

The result is amazing, well done. :D

Can you tell me with what tools you made it?did you buy meta spinning tools?
User avatar
KurtHuhn
Site Admin
Posts: 5326
Joined: Thu Nov 23, 2006 8:00 pm
Location: United States/Rhode Island

Re: Teaser of things to come...

Post by KurtHuhn »

Nope - I didn't buy a single thing for this. I have metal sheet of various flavors hanging around the shop from older projects, and I just used what I had here for the rest. I 1/4" rod of tool steel that I ground to shape served as my tool, and I used some aluminum rod stock to create the form and clamping head. It is great fun, but be prepared to make some pretty poopy pieces before you get one good one.

Some observations:
- Thinner sheet is not easier to spin, as it has a tendency to tear.
- Silver is a cast iron bitch to turn.
- Small pieces are harder to spin than larger pieces.
- I would not attempt to modify an existing toolrest for this. Make or buy a new one that is specific to spinning.
- If you've gone so far as to attempt metal spinning, making your own tools is way less expensive, and not that difficult.
- Start with pewter, not copper, you dunderhead.... :banghead:
Kurt Huhn
AKA: Oversized Ostrogoth
artisan@k-huhn.com
Post Reply