Page 11 of 13
Re: PITH 2015
Posted: Sat Aug 08, 2015 2:25 pm
by taharris
I always find myself going back and forth through the PITH thread every year trying to look at all of the pipes.
So, for simplicity, I have re-posted mine here since I originally posted it a while back.
Yes, it is actually free standing in the picture. There can be no drafts and the surface has to be perfectly level, but it does sit.
The rules say it has to be a sitter, not a stable sitter.
Todd
Re: PITH 2015
Posted: Sat Aug 08, 2015 3:55 pm
by mightysmurf8201
That's awesome. I would not be brave enough to attempt a pick axe type sitter. Mad props for pulling it off man.
Sent from my iPhone using Tapatalk
Re: PITH 2015
Posted: Sat Aug 08, 2015 6:45 pm
by PremalChheda
Make sure everyone is confirmed before pipes start shipping everywhere in case there was a last minute disaster and someone has to drop.
My compressor motor blew up, so a little delay. It will ship out Monday and pics up asap.
Re: PITH 2015
Posted: Sun Aug 09, 2015 10:10 am
by N.Burnsworth
I had also run into some equipment failure which put me back a bit and also have been working 10-12 hours 7 days a week. I am getting close and should be finished this evening or Monday evening and will post pics ASAP. I've already contacted Seamonster to inform him I will ship it out on Tuesday or Wednesday morning and appologise for the delay and any inconvenience.
Re: PITH 2015
Posted: Sun Aug 09, 2015 12:11 pm
by mightysmurf8201
Not a problem. Just making sure there's proper communication between each other so everything gets worked out properly.
Sent from my iPhone using Tapatalk
Re: PITH 2015
Posted: Sun Aug 09, 2015 7:27 pm
by mightysmurf8201
Has everyone at least made contact with their pipe donors and recipients?
Re: PITH 2015
Posted: Sun Aug 09, 2015 8:30 pm
by seamonster
I've reached out to finster, but haven't heard a response.
Re: PITH 2015
Posted: Sun Aug 09, 2015 8:36 pm
by Jthompson1995
I've been in touch with both sender and receiver.
Re: PITH 2015
Posted: Sun Aug 09, 2015 8:46 pm
by scotties22
I'll pm Josh now
Re: PITH 2015
Posted: Sun Aug 09, 2015 9:15 pm
by PremalChheda
Messaged both, and got responses from both. Make sure if you do not know the receiver or sender, or if they do not have public profiles, to get email address and physical address and phone.
Re: PITH 2015
Posted: Mon Aug 10, 2015 1:25 am
by Oakbear
I have touched both the giver and the receiver.
Re: PITH 2015
Posted: Mon Aug 10, 2015 7:42 am
by Jthompson1995
Oakbear wrote:I have touched both the giver and the receiver.
Now that really sounds creepy!
Re: PITH 2015
Posted: Mon Aug 10, 2015 9:59 am
by scotties22
I finally found my camera!! Here is my pipe. It was a learning experience for sure. I know there are a lot of things that I can improve when I finally get around to making another bamboo shanked pipe.......like 3 more years from now
Re: PITH 2015
Posted: Mon Aug 10, 2015 12:39 pm
by notow1
I have communicated with both parties and all is good, Norm.
Re: PITH 2015
Posted: Mon Aug 10, 2015 9:06 pm
by mightysmurf8201
I guess I should follow my own rules here and set the example, so yeah, I'm good with both my peeps.
Re: PITH 2015
Posted: Mon Aug 10, 2015 9:11 pm
by scotties22
Re: PITH 2015
Posted: Mon Aug 10, 2015 9:58 pm
by mightysmurf8201
My momma raised me to be a gentleman and gentleman don't fondle their friends.
Re: PITH 2015
Posted: Tue Aug 11, 2015 1:34 am
by Oakbear
Jthompson1995 wrote:Oakbear wrote:I have touched both the giver and the receiver.
Now that really sounds creepy!
Re: PITH 2015
Posted: Tue Aug 11, 2015 10:26 pm
by impish1
Ok Gentlemen. I am finally DONE! What is the protocol for posting pics of our work? How many is good?
Re: PITH 2015
Posted: Tue Aug 11, 2015 11:27 pm
by mightysmurf8201
No need to get crazy. 2 or 3 from different angles should be fine. Your real critique will come when you're recipient gets it and has a chance to inspect and smoke it.
Sent from my iPhone using Tapatalk
