pipemakersforum.com

Posted: **Thu Dec 04, 2008 1:43 pm**

Kris and I have been in conversation with SEM and they do have some rods of black/green, black/blue, and a couple left of black/red. There are more colors being produced in a couple weeks - black/brown and black/tan.

Any interest in another group buy? I'm going to go ahead and get myself some, so if you want any, let me know ASAP - by the end of the weekend at the latest.

Posted: **Thu Dec 04, 2008 6:35 pm**

Kurt, did you get that last email I forwarded?

They also have uni color red, blue, and green. I assume that means a solid color of ebonite. I didn't know they could do that. Cost: 44 Euros, diameter ?, but I'm again making an assumption that it's 22mm raw.

The swirls are 50 Euros - for raw 22mm, or "smoothed" 20 & 18mm.

I was hoping to get pics of the black/brown and black/tan before deciding to order it for fear of a peachy tan, but I'll email my present wish list by tomorrow.

The Euro has now dropped to $1.28

Posted: **Thu Dec 04, 2008 9:49 pm**

Upon further review (I typed the above in haste), I'm going to extend the deadline for letting me know that you're interested in some marbled rods. No need to let me know how much or of what color just yet - only that you're interested.

Please let me know by Friday 12/12/2008.

Posted: **Fri Dec 05, 2008 10:30 am**

KurtHuhn wrote:Upon further review (I typed the above in haste), I'm going to extend the deadline for letting me know that you're interested in some marbled rods. No need to let me know how much or of what color just yet - only that you're interested.

Please let me know by Friday 12/12/2008.

I'm in!

Posted: **Fri Dec 05, 2008 7:53 pm**

I'm in

Posted: **Sat Dec 06, 2008 1:24 am**

I'm interested!

Posted: **Fri Dec 12, 2008 10:00 am**

I am interested as well!

Thanks!

Posted: **Mon Dec 22, 2008 2:18 am**

I did not notice that I was out of black. I would like to try some swirl also.
If I am too late I will place a order on my own.

Please let me know.

Thanks,
Skip Elliott

Posted: **Mon Dec 22, 2008 8:21 am**

Heya guys,

I'll start gathering orders now. Both swirls and black. If anyone needs the price list or a refresher on colors, just shout. Send your orders to pipecrafter@pipecrafter.com, and I'll start organizing the order. I expect to place the order by Friday, so don't hesitate.

Posted: **Mon Dec 22, 2008 1:41 pm**

I'll start gathering orders now. Both swirls and black. If anyone needs the price list or a refresher on colors, just shout.

Hey Kurt,

can you shoot me a price list and refresher on colors?

Thanks!

E.

Posted: **Tue Dec 23, 2008 1:19 am**

I need a price list also.
Thanks,
Skip Elliott

Posted: **Tue Dec 23, 2008 8:49 am**

Yep, a price list and colors would be a good thing.
Could you send it to me as well?

And Money by???

Posted: **Tue Dec 23, 2008 9:30 pm**

Hi Kurt,
I'll take one of each color, 22mm raw.
Let me know a total and I'll paypal it to you.
Thanks

Posted: **Wed Dec 24, 2008 8:37 am**

Here's the price list from SEM:

Code: Select all

	diameter	raw		smoothed
	∅ 6 mm		€ 13,-		€ 17,-
	∅ 8 mm		€ 14,-		€ 18,-
	∅ 10 mm		€ 15,-		€ 19,-
	∅ 12 mm		€ 18,-		€ 22,-
	∅ 14 mm		€ 20,-		€ 24,-
	∅ 16 mm		€ 21,-		€ 25,-
	∅ 18 mm		€ 22,-		€ 26,-
	∅ 20 mm		€ 24,-		€ 28,-
	∅ 22 mm		€ 27,-		€ 31,-
	∅ 24 mm		€ 29,-		€ 33,-
	∅ 26 mm		€ 32,-		€ 36,-
	∅ 28 mm		€ 34,-		€ 38,-
	∅ 30 mm		€ 36,-		€ 40,-
	∅ 32 mm		€ 38,-		€ 42,-
	∅ 34 mm		€ 42,-		€ 46,-
	∅ 36 mm		€ 46,-		€ 50,-
	∅ 38 mm		€ 50,-		€ 55,-
	∅ 40 mm		€ 54,-		€ 60,-
	∅ 50 mm		€ 70,-		€ 80,-

The swirled rods are priced at 50 Euro each, and are 18 or 20mm smoothed or 22mm raw.

Here's a representative photo:

The marbled colors are a volitile stock item. What's in one day might be sold out the next. Pen makers all over the world have taken notice of it, and are scrambling to get a hold of it. I'll do my best to get everybody what they want however.

Posted: **Wed Dec 24, 2008 8:42 am**

In other news, I don't want full rods of most of these swirled colors. Does anyone want to go halfsies? I'm probably going to want some of each, including whatever new colors are in development over at SEM (tan/black, brown/black).

I've already got enough confirmed to place the order, so I'm thinking I'll send it off on Monday. Speak now!

Posted: **Wed Dec 24, 2008 10:24 am**

Hmmm - that's about $70 US per rod before shipping it (twice). I've reconsidered and will pass this time.

Posted: **Wed Dec 24, 2008 10:37 am**

With the holidays, the funds aren't there, and I won't be home in time to raise them, so I'll have to pass as well. Halfsies are closer, but probably still better pass. Thanks anyway Kurt.

Posted: **Wed Dec 24, 2008 10:56 am**

KurtHuhn wrote:Does anyone want to go halfsies?

I'm definately down for halfsies, maybe thirdsies.

Posted: **Wed Dec 24, 2008 3:36 pm**

I'll go halvsies on one of each of whatever is available, or even thirdsies.

Otherwise, if I have to go whole: one red, one brown.

If any of those colors aren't available, I'd have to consider what is... but I'm down for the cost of two whole rods.

Posted: **Fri Dec 26, 2008 7:49 pm**

I'd also be interested in the "uni-color" staves, if it is what I think it should be. I think I like the idea of a solid color red and even blue (green, not so much), but I don't think I like the idea more than 43 euros each. Halfsies or thirdsies on solid colors is an idea I like a lot, so if anyone else is curious and would be interested in splitting "uni-color" rods, I'd increase my maximum order spending limit to 3 rods worth total - 2 meters of swirlys and 1 meter of uni's.

pipemakersforum.com

Any interest in the SEM swirls?

Any interest in the SEM swirls?

Any interest in SEM Swirls?

Any interest in SEM Swirls?