PITH 2015
Re: PITH 2015
I always find myself going back and forth through the PITH thread every year trying to look at all of the pipes.
So, for simplicity, I have re-posted mine here since I originally posted it a while back.
Yes, it is actually free standing in the picture. There can be no drafts and the surface has to be perfectly level, but it does sit.
The rules say it has to be a sitter, not a stable sitter.
Todd
So, for simplicity, I have re-posted mine here since I originally posted it a while back.
Yes, it is actually free standing in the picture. There can be no drafts and the surface has to be perfectly level, but it does sit.
The rules say it has to be a sitter, not a stable sitter.
Todd
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
That's awesome. I would not be brave enough to attempt a pick axe type sitter. Mad props for pulling it off man.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- PremalChheda
- Posts: 1213
- Joined: Sat Dec 11, 2010 6:03 pm
- Location: Columbus, Ohio, USA
- Contact:
Re: PITH 2015
Make sure everyone is confirmed before pipes start shipping everywhere in case there was a last minute disaster and someone has to drop.
My compressor motor blew up, so a little delay. It will ship out Monday and pics up asap.
My compressor motor blew up, so a little delay. It will ship out Monday and pics up asap.
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
-
- Posts: 148
- Joined: Sat Jul 14, 2012 8:19 am
- Location: Ohio, USA
- Contact:
Re: PITH 2015
I had also run into some equipment failure which put me back a bit and also have been working 10-12 hours 7 days a week. I am getting close and should be finished this evening or Monday evening and will post pics ASAP. I've already contacted Seamonster to inform him I will ship it out on Tuesday or Wednesday morning and appologise for the delay and any inconvenience.
Nicholas Burnsworth
Boulder & Briar
Boulder & Briar
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
Not a problem. Just making sure there's proper communication between each other so everything gets worked out properly.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
Has everyone at least made contact with their pipe donors and recipients?
- seamonster
- Posts: 380
- Joined: Fri Feb 21, 2014 12:43 am
- Location: Portland, OR
Re: PITH 2015
I've reached out to finster, but haven't heard a response.
instagram.com/seamonster_workshop/
- Jthompson1995
- Posts: 186
- Joined: Sat Apr 13, 2013 6:32 am
- Location: Parkville, MD
Re: PITH 2015
I've been in touch with both sender and receiver.
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
-Walter Blodget
-
- Posts: 1767
- Joined: Mon Jun 11, 2012 9:43 pm
- Location: Missouri
- Contact:
Re: PITH 2015
I'll pm Josh now
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
www.ladybriar.com
- PremalChheda
- Posts: 1213
- Joined: Sat Dec 11, 2010 6:03 pm
- Location: Columbus, Ohio, USA
- Contact:
Re: PITH 2015
Messaged both, and got responses from both. Make sure if you do not know the receiver or sender, or if they do not have public profiles, to get email address and physical address and phone.
Premal Chheda
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
http://www.chhedapipes.com - Just for fun
http://www.smokershaven.com - New & Estate Pipes
http://www.rawkrafted.com - Pipe Making Tools, Materials, & Supplies
Re: PITH 2015
I have touched both the giver and the receiver.
- Jthompson1995
- Posts: 186
- Joined: Sat Apr 13, 2013 6:32 am
- Location: Parkville, MD
Re: PITH 2015
Now that really sounds creepy!Oakbear wrote:I have touched both the giver and the receiver.
Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget
-Walter Blodget
-
- Posts: 1767
- Joined: Mon Jun 11, 2012 9:43 pm
- Location: Missouri
- Contact:
Re: PITH 2015
I finally found my camera!! Here is my pipe. It was a learning experience for sure. I know there are a lot of things that I can improve when I finally get around to making another bamboo shanked pipe.......like 3 more years from now
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
www.ladybriar.com
Re: PITH 2015
I have communicated with both parties and all is good, Norm.
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
I guess I should follow my own rules here and set the example, so yeah, I'm good with both my peeps.
-
- Posts: 1767
- Joined: Mon Jun 11, 2012 9:43 pm
- Location: Missouri
- Contact:
Re: PITH 2015
At least you didn't go and get all touchy feely like Oakbear did.....MUCH appreciatedmightysmurf8201 wrote:I guess I should follow my own rules here and set the example, so yeah, I'm good with both my peeps.
Am I Calamity Jane or Annie Oakley??...depends on the day.
www.ladybriar.com
www.ladybriar.com
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
My momma raised me to be a gentleman and gentleman don't fondle their friends.scotties22 wrote:At least you didn't go and get all touchy feely like Oakbear did.....MUCH appreciatedmightysmurf8201 wrote:I guess I should follow my own rules here and set the example, so yeah, I'm good with both my peeps.
Re: PITH 2015
Jthompson1995 wrote:Now that really sounds creepy!Oakbear wrote:I have touched both the giver and the receiver.
- Attachments
-
- 2c7b084dbf2b2c6d8bd34ef3ddc5b2726e231388a78b27edf7e6e5160111f98f.jpeg (61.43 KiB) Viewed 1868 times
Re: PITH 2015
Ok Gentlemen. I am finally DONE! What is the protocol for posting pics of our work? How many is good?
- mightysmurf8201
- Posts: 712
- Joined: Sat Jan 07, 2012 12:44 pm
- Location: Hudson, OH
- Contact:
Re: PITH 2015
No need to get crazy. 2 or 3 from different angles should be fine. Your real critique will come when you're recipient gets it and has a chance to inspect and smoke it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk