#39 - First Bulldog

Want to show you work to the world? Want a place to post photos of your work and solicit the opinions of those that have gone before you? Post your work here.
Post Reply
BrianMadsen
Posts: 117
Joined: Thu Jan 30, 2014 10:39 am

#39 - First Bulldog

Post by BrianMadsen »

Hello guys
This is the first bulldog I've made, and i think it came out pretty good!
Just wanted to share it with you. The white ring is camel bone.
As always, comments and critique are welcome
Have a great weekend!

Image

Image

Image

Image

Image

Image

Image

Image
DocAitch
Posts: 1113
Joined: Mon Dec 14, 2015 12:44 am
Location: Baltimore, Maryland

Re: #39 - First Bulldog

Post by DocAitch »

Very nice!
It does appear to me that the shank has a little bit of 'belly' and and the top line of the shank curves slightly upward in the profile, but that would be the very devil to straighten with a diamond shank.
Especially good job on a first.
DocAitch
"Hettinger, if you stamp 'hand made' on a dog turd, some one will buy it."
-Charles Hollyday, pipe maker, reluctant mentor, and curmudgeon
" Never show an idiot an unfinished pipe!"- same guy
User avatar
sandahlpipe
Posts: 2106
Joined: Mon Feb 04, 2013 8:49 pm
Location: Zimmerman, MN
Contact:

Re: #39 - First Bulldog

Post by sandahlpipe »

The bottom line of the shank doesn't look straight. Your lines on the cheeks under the bowl aren't crisp. The bottom two sides of the shank should be flat all the way past the cheeks.
---
Fail early, fail often. Your success depends on it.

Jeremiah Sandahl
http://sandahlpipe.com
JMG
Posts: 1186
Joined: Sat Nov 06, 2010 10:28 pm
Location: Mississippi

Re: #39 - First Bulldog

Post by JMG »

sandahlpipe wrote:The bottom line of the shank doesn't look straight. Your lines on the cheeks under the bowl aren't crisp. The bottom two sides of the shank should be flat all the way past the cheeks.
That may be technically true for the bottom sides of the shank but I sure like the looks better when it doesn't.
"No reserves, no retreats, no regrets"

"When you're dumb...you've got to be tough." - my dad
User avatar
Sasquatch
Posts: 5147
Joined: Tue Jan 13, 2009 1:46 am

Re: #39 - First Bulldog

Post by Sasquatch »

Sanding scratches all over the bowl man, come on! That's at "resand and stain again" stage, not "okay it's done I'll wax it".

Shaping is pretty good, little wobbles in the shank and I find the bowl a little top-heavy. A little more chin gives a bulldog a more aggressive appearance.
ALL YOUR PIPE ARE BELONG TO US!
Charl
Posts: 1901
Joined: Mon Jan 07, 2008 3:03 pm
Location: South Africa

Re: #39 - First Bulldog

Post by Charl »

For a first bullie, pretty decent!
One other small thing that looks a bit off to me: I would personally rather taper the stem from the shank through to the bit, than what you did. But that's me.
Post Reply