carbon coating for bowls
carbon coating for bowls
i was just wondering .. how do people carbon coat their bowls? is there a particular product for sale somewhere? if so, may i ask where? and how is it used properly.
- LexKY_Pipe
- Posts: 875
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Lexington, Kentucky USA
Re: carbon coating for bowls
I bought charcoal powder in bulk from an education supply store. I mix 1 tbs of sour cream with 1 tbs of buttermilk and then add the charcoal to thicken the mixture. This is a very common recipe. I usually mix up a batch and coat a bunch of pipes at the same time. It does keep in the fridge.
Some people use finely ground glass beads with the mixture.
Some people use finely ground glass beads with the mixture.
Re: carbon coating for bowls
I just crushed up a briquette and added water.
- stummel bum
- Posts: 87
- Joined: Tue Dec 29, 2009 12:40 am
- Location: South Carolina/USA
- Contact:
Re: carbon coating for bowls
Same recipe I use (minus the glass). I just bought a fish tank filter that uses activated charcoal, and ground it up into powder. You want to add enough carbon to the dairy to make it a toothpaste-like consistency. Then just smear it on with your finger. You don't need a very thick coating just enough so the wood doesn't show through. Let dry overnight and light it up. Leaves a nice hard carbon shell.LexKY_Pipe wrote:I bought charcoal powder in bulk from an education supply store. I mix 1 tbs of sour cream with 1 tbs of buttermilk and then add the charcoal to thicken the mixture. This is a very common recipe. I usually mix up a batch and coat a bunch of pipes at the same time. It does keep in the fridge.
Some people use finely ground glass beads with the mixture.
Cheers,
Rob
Rob
Re: carbon coating for bowls
thanks guys
Re: carbon coating for bowls
Is this right? I had heard that water glass is used, but never heard of actual glass mixed in.LexKY_Pipe wrote:Some people use finely ground glass beads with the mixture.
- LexKY_Pipe
- Posts: 875
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Lexington, Kentucky USA
Re: carbon coating for bowls
I meant "water glass." My bad. Thanks for the correction.Leus wrote:Is this right? I had heard that water glass is used, but never heard of actual glass mixed in.LexKY_Pipe wrote:Some people use finely ground glass beads with the mixture.

-
- Posts: 223
- Joined: Thu Jun 26, 2008 5:03 pm
- Location: pennsylvania USA
Re: carbon coating for bowls
I tried this with disasterous results. The smoke had a very powerful and unpleasant flavor. I had to scrape the coating from the pipe. I then purchased charcoal capsules from a pharmacy and used the buttermilk recipe described above. When I used the purified carbon I found no detectable flavor. Charcoal capsules can be found in any drug store, they are used for the treatment of flatulence.I just crushed up a briquette and added water.
Re: carbon coating for bowls
pennsyscot wrote: Charcoal capsules can be found in any drug store, they are used for the treatment of flatulence.
From what I've read in this forum they should be considered mandatory supplies for pipemaking...
Re: carbon coating for bowls
for the pipemaking? or for the flatulence?Leus wrote:pennsyscot wrote: Charcoal capsules can be found in any drug store, they are used for the treatment of flatulence.
From what I've read in this forum they should be considered mandatory supplies for pipemaking...

- SimeonTurner
- Site Supporter
- Posts: 750
- Joined: Wed Dec 24, 2008 7:46 pm
- Location: Denver, Colorado
- Contact:
Re: carbon coating for bowls
You must be referring to Rad's infamous "brown blast" sandblasting technique. I believe he uses charcoal capsules when he is going for a shallower, less detailed blast.Leus wrote:pennsyscot wrote: Charcoal capsules can be found in any drug store, they are used for the treatment of flatulence.
From what I've read in this forum they should be considered mandatory supplies for pipemaking...

"It is noble to be good; it is still nobler to teach others to be good - and less trouble."
Turner Pipes Website:
http://www.turnerpipes.com
Of Briar and Ashes:
http://turnerpipes.wordpress.com
Turner Pipes Website:
http://www.turnerpipes.com
Of Briar and Ashes:
http://turnerpipes.wordpress.com
- LexKY_Pipe
- Posts: 875
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Lexington, Kentucky USA
Re: carbon coating for bowls
Google "charcoal powder". You'll find sources where you can buy it in bulk form.
- 1FatBastard
- Posts: 5
- Joined: Tue Jan 31, 2012 1:01 pm
- Location: Denmark
- Contact:
Re: carbon coating for bowls
For a healthier coating, use non-fat buttermilk and sour cream. 

Re: carbon coating for bowls
Rad had a great quote in the recent P&T magazine about bowl coatings. I'll dig it up and post it here. Unless of course the man himself would do the honors. 

- ToddJohnson
- Posts: 1366
- Joined: Thu Nov 23, 2006 8:00 pm
- Location: Nashville, TN
- Contact:
Re: carbon coating for bowls
Most Danish and many American pipe makers, myself included, use a combination of Sodium Silicate (water glass) crushed pumice, and activated charcoal. Oh, and I spit in it.
TJ
P.S. To the fellow crushing up the Kingsford nuggets, you're not supposed to use the ones that have already been soaked in lighter fluid!
TJ
P.S. To the fellow crushing up the Kingsford nuggets, you're not supposed to use the ones that have already been soaked in lighter fluid!
- baweaverpipes
- The Awesomer
- Posts: 947
- Joined: Tue Dec 19, 2006 8:07 am
- Location: Franklin, Tennessee
- Contact:
Re: carbon coating for bowls
I've seen him do it!!!ToddJohnson wrote:Most Danish and many American pipe makers, myself included, use a combination of Sodium Silicate (water glass) crushed pumice, and activated charcoal. Oh, and I spit in it.
TJ
I prefer yak saliva.
-
- Posts: 46
- Joined: Tue Aug 23, 2011 12:14 am
- Location: Medford, Oregon
carbon coating for bowls
Hey, If anyone wants to try a little water glass, I bought a really big jug of high purity lab grade sodium silicate. I'll package it in 25mg bags. PM me for more details.
Not sure I want my hobby to turn into my job largely because I grow to hate my job....
-
- Posts: 46
- Joined: Tue Aug 23, 2011 12:14 am
- Location: Medford, Oregon
carbon coating for bowls
Not 25mg...... Woke up this morning realized I meant 25 gram baggies.........feel like a drug dealer.... "dime bags on the street corner..."
Not sure I want my hobby to turn into my job largely because I grow to hate my job....
Re: carbon coating for bowls
I've been using a mixture of honey, water, and activated charcoal. I really like it. It's deep black instead of gray, covers with a very thin coat, and best simulates a natural cake. It's also very neutral in flavor.
Re: carbon coating for bowls
I'm a bit torn here - I'd like to say "uncoated bowls rule!", but then I see carvers like Todd who coat the bowls and I think, hmm...
Anyway for now I keep my bowls clean, cause there's so many smokers out there who are convinced that bowl coatings are evil by definition, so at least I don't need to spend time explaining the matter to them.
And really, I understand all the honey, dairy and carbon based recipes, but water glass? That does seem to seal the bowl and stay there for some time, since it's quite fire resistant, isn't that right? But who am I to know, probably Todd's spit prevents that!
Anyway for now I keep my bowls clean, cause there's so many smokers out there who are convinced that bowl coatings are evil by definition, so at least I don't need to spend time explaining the matter to them.
And really, I understand all the honey, dairy and carbon based recipes, but water glass? That does seem to seal the bowl and stay there for some time, since it's quite fire resistant, isn't that right? But who am I to know, probably Todd's spit prevents that!
